This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770161217 | 19 Count | 99 Count | 17 Count | 0 VDC | 0 VDC |
| 1770159416 | 12 Count | 67 Count | 11 Count | 0 VDC | 0 VDC |
| 1770157615 | 5 Count | 34 Count | 5 Count | 0 VDC | 0 VDC |
| 1770155814 | 402 Count | 1021 Count | 375 Count | 0 VDC | 0 VDC |
| 1770154014 | 393 Count | 990 Count | 367 Count | 0 VDC | 0 VDC |
| 1770152221 | 371 Count | 943 Count | 350 Count | 0 VDC | 0 VDC |
| 1770150420 | 348 Count | 889 Count | 328 Count | 0 VDC | 0 VDC |
| 1770148619 | 328 Count | 838 Count | 309 Count | 0 VDC | 0 VDC |
| 1770146819 | 317 Count | 798 Count | 299 Count | 0 VDC | 0 VDC |
| 1770145018 | 309 Count | 761 Count | 292 Count | 0 VDC | 0 VDC |
| 1770143217 | 279 Count | 706 Count | 263 Count | 0 VDC | 0 VDC |
| 1770141416 | 264 Count | 652 Count | 249 Count | 0 VDC | 0 VDC |
| 1770139616 | 254 Count | 600 Count | 240 Count | 0 VDC | 0 VDC |
| 1770137815 | 246 Count | 554 Count | 233 Count | 0 VDC | 0 VDC |
| 1770136014 | 220 Count | 493 Count | 208 Count | 0 VDC | 0 VDC |
| 1770134213 | 199 Count | 445 Count | 188 Count | 0 VDC | 0 VDC |
| 1770132413 | 159 Count | 366 Count | 149 Count | 0 VDC | 0 VDC |
| 1770130620 | 119 Count | 300 Count | 114 Count | 0 VDC | 0 VDC |
| 1770128820 | 83 Count | 228 Count | 79 Count | 0 VDC | 0 VDC |
| 1770127019 | 40 Count | 139 Count | 37 Count | 0 VDC | 0 VDC |
| 1770125218 | 25 Count | 80 Count | 23 Count | 0 VDC | 0 VDC |
| 1770123417 | 16 Count | 51 Count | 15 Count | 0 VDC | 0 VDC |
| 1770121617 | 7 Count | 24 Count | 7 Count | 0 VDC | 0 VDC |
| 1770119816 | 221 Count | 1004 Count | 162 Count | 0 VDC | 0 VDC |
| 1770118015 | 214 Count | 981 Count | 156 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)