This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787541632 | 94 Count | 406 Count | 86 Count | 0 VDC | 0 VDC |
| 1787539832 | 85 Count | 369 Count | 78 Count | 0 VDC | 0 VDC |
| 1787538031 | 72 Count | 316 Count | 66 Count | 0 VDC | 0 VDC |
| 1787536230 | 62 Count | 267 Count | 57 Count | 0 VDC | 0 VDC |
| 1787534429 | 46 Count | 210 Count | 42 Count | 0 VDC | 0 VDC |
| 1787532629 | 34 Count | 160 Count | 31 Count | 0 VDC | 0 VDC |
| 1787530828 | 26 Count | 125 Count | 24 Count | 0 VDC | 0 VDC |
| 1787529027 | 17 Count | 80 Count | 16 Count | 0 VDC | 0 VDC |
| 1787527226 | 7 Count | 44 Count | 7 Count | 0 VDC | 0 VDC |
| 1787525426 | 427 Count | 1038 Count | 395 Count | 0 VDC | 0 VDC |
| 1787523625 | 415 Count | 991 Count | 384 Count | 0 VDC | 0 VDC |
| 1787521832 | 399 Count | 947 Count | 373 Count | 0 VDC | 0 VDC |
| 1787520031 | 388 Count | 898 Count | 363 Count | 0 VDC | 0 VDC |
| 1787518231 | 381 Count | 854 Count | 357 Count | 0 VDC | 0 VDC |
| 1787516430 | 375 Count | 773 Count | 352 Count | 0 VDC | 0 VDC |
| 1787514629 | 365 Count | 723 Count | 343 Count | 0 VDC | 0 VDC |
| 1787512828 | 345 Count | 664 Count | 324 Count | 0 VDC | 0 VDC |
| 1787511028 | 322 Count | 597 Count | 302 Count | 0 VDC | 0 VDC |
| 1787509227 | 315 Count | 557 Count | 296 Count | 0 VDC | 0 VDC |
| 1787507426 | 304 Count | 514 Count | 286 Count | 0 VDC | 0 VDC |
| 1787505625 | 291 Count | 472 Count | 274 Count | 0 VDC | 0 VDC |
| 1787503824 | 254 Count | 407 Count | 238 Count | 0 VDC | 0 VDC |
| 1787502024 | 238 Count | 366 Count | 223 Count | 0 VDC | 0 VDC |
| 1787498431 | 179 Count | 255 Count | 177 Count | 0 VDC | 0 VDC |
| 1787496630 | 92 Count | 134 Count | 91 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)