This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770165722 | 35 Count | 68 Count | 33 Count | 4.02 VDC | 0 VDC |
| 1770163926 | 26 Count | 49 Count | 25 Count | 4.03 VDC | 0 VDC |
| 1770162128 | 12 Count | 23 Count | 12 Count | 4.03 VDC | 0 VDC |
| 1770160330 | 502 Count | 1004 Count | 447 Count | 4.03 VDC | 0 VDC |
| 1770158534 | 491 Count | 984 Count | 437 Count | 4.03 VDC | 0 VDC |
| 1770156735 | 482 Count | 966 Count | 429 Count | 4.03 VDC | 0 VDC |
| 1770154939 | 464 Count | 938 Count | 412 Count | 4.03 VDC | 0 VDC |
| 1770153143 | 454 Count | 919 Count | 403 Count | 4.03 VDC | 0 VDC |
| 1770151345 | 440 Count | 897 Count | 390 Count | 4.03 VDC | 0 VDC |
| 1770149549 | 423 Count | 870 Count | 374 Count | 4.03 VDC | 0 VDC |
| 1770147752 | 414 Count | 851 Count | 366 Count | 4.03 VDC | 0 VDC |
| 1770145955 | 402 Count | 824 Count | 355 Count | 4.03 VDC | 0 VDC |
| 1770144157 | 393 Count | 804 Count | 347 Count | 4.03 VDC | 0 VDC |
| 1770142359 | 377 Count | 781 Count | 332 Count | 4.03 VDC | 0 VDC |
| 1770140562 | 336 Count | 730 Count | 292 Count | 4.04 VDC | 0 VDC |
| 1770138764 | 315 Count | 701 Count | 272 Count | 4.04 VDC | 0 VDC |
| 1770136966 | 287 Count | 661 Count | 245 Count | 4.04 VDC | 0 VDC |
| 1770135169 | 277 Count | 642 Count | 236 Count | 4.04 VDC | 0 VDC |
| 1770133372 | 268 Count | 624 Count | 228 Count | 4.05 VDC | 2.22 VDC |
| 1770131576 | 258 Count | 608 Count | 219 Count | 4.05 VDC | 5.44 VDC |
| 1770129777 | 247 Count | 587 Count | 209 Count | 4.05 VDC | 5.46 VDC |
| 1770127980 | 237 Count | 571 Count | 200 Count | 4.06 VDC | 5.46 VDC |
| 1770126181 | 228 Count | 554 Count | 192 Count | 4.06 VDC | 5.46 VDC |
| 1770124383 | 218 Count | 539 Count | 183 Count | 4.06 VDC | 5.46 VDC |
| 1770122587 | 185 Count | 501 Count | 151 Count | 4.06 VDC | 5.46 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)