This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765997276 | 728 Count | 913 Count | 657 Count | 3.28 VDC | 0 VDC |
| 1765995479 | 719 Count | 902 Count | 649 Count | 3.29 VDC | 0 VDC |
| 1765993682 | 706 Count | 888 Count | 637 Count | 3.29 VDC | 0 VDC |
| 1765991885 | 697 Count | 877 Count | 629 Count | 3.29 VDC | 0 VDC |
| 1765990089 | 687 Count | 867 Count | 620 Count | 3.3 VDC | 0 VDC |
| 1765988293 | 678 Count | 855 Count | 612 Count | 3.31 VDC | 0 VDC |
| 1765986497 | 666 Count | 838 Count | 601 Count | 3.31 VDC | 0 VDC |
| 1765984699 | 655 Count | 820 Count | 591 Count | 3.31 VDC | 0 VDC |
| 1765982901 | 644 Count | 803 Count | 581 Count | 3.31 VDC | 0 VDC |
| 1765981104 | 635 Count | 792 Count | 573 Count | 3.33 VDC | 0.9 VDC |
| 1765979307 | 625 Count | 779 Count | 564 Count | 3.34 VDC | 1.84 VDC |
| 1765977512 | 594 Count | 746 Count | 534 Count | 3.34 VDC | 2.66 VDC |
| 1765975714 | 562 Count | 710 Count | 503 Count | 3.35 VDC | 2.76 VDC |
| 1765973916 | 535 Count | 680 Count | 477 Count | 3.36 VDC | 3.22 VDC |
| 1765972120 | 528 Count | 669 Count | 471 Count | 3.36 VDC | 2.7 VDC |
| 1765970322 | 521 Count | 660 Count | 465 Count | 3.36 VDC | 2.7 VDC |
| 1765968525 | 514 Count | 650 Count | 459 Count | 3.36 VDC | 3.18 VDC |
| 1765966728 | 507 Count | 643 Count | 453 Count | 3.36 VDC | 2.42 VDC |
| 1765964931 | 498 Count | 631 Count | 445 Count | 3.36 VDC | 2.08 VDC |
| 1765963134 | 488 Count | 620 Count | 436 Count | 3.36 VDC | 3.12 VDC |
| 1765961337 | 474 Count | 604 Count | 423 Count | 3.36 VDC | 2.48 VDC |
| 1765959540 | 464 Count | 591 Count | 414 Count | 3.36 VDC | 2.24 VDC |
| 1765959530 | 459 Count | 591 Count | 414 Count | 3.37 VDC | 2.4 VDC |
| 1765957732 | 450 Count | 575 Count | 406 Count | 3.36 VDC | 2.54 VDC |
| 1765955935 | 439 Count | 558 Count | 396 Count | 3.36 VDC | 2.7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)