This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775281006 | 443 Count | 996 Count | 373 Count | 4.05 VDC | 4.4 VDC |
| 1775279209 | 436 Count | 985 Count | 367 Count | 4.05 VDC | 4.4 VDC |
| 1775279199 | 431 Count | 985 Count | 367 Count | 4.05 VDC | 4.4 VDC |
| 1775277401 | 424 Count | 967 Count | 361 Count | 4.05 VDC | 4.42 VDC |
| 1775275603 | 417 Count | 949 Count | 355 Count | 4.04 VDC | 0.22 VDC |
| 1775273803 | 411 Count | 930 Count | 350 Count | 4.05 VDC | 0 VDC |
| 1775272005 | 402 Count | 906 Count | 342 Count | 4.05 VDC | 0 VDC |
| 1775270207 | 394 Count | 881 Count | 335 Count | 4.05 VDC | 0 VDC |
| 1775268409 | 386 Count | 857 Count | 328 Count | 4.05 VDC | 0 VDC |
| 1775266610 | 379 Count | 839 Count | 322 Count | 4.05 VDC | 0 VDC |
| 1775264813 | 372 Count | 815 Count | 316 Count | 4.05 VDC | 0 VDC |
| 1775263013 | 366 Count | 795 Count | 311 Count | 4.05 VDC | 0 VDC |
| 1775261215 | 362 Count | 779 Count | 308 Count | 4.05 VDC | 0 VDC |
| 1775259416 | 356 Count | 761 Count | 303 Count | 4.05 VDC | 0 VDC |
| 1775257619 | 348 Count | 740 Count | 296 Count | 4.06 VDC | 0 VDC |
| 1775255821 | 341 Count | 723 Count | 290 Count | 4.06 VDC | 0 VDC |
| 1775254022 | 333 Count | 703 Count | 283 Count | 4.06 VDC | 0 VDC |
| 1775252225 | 326 Count | 685 Count | 277 Count | 4.06 VDC | 0 VDC |
| 1775250428 | 319 Count | 667 Count | 271 Count | 4.06 VDC | 0 VDC |
| 1775248630 | 312 Count | 649 Count | 265 Count | 4.06 VDC | 0 VDC |
| 1775246831 | 305 Count | 632 Count | 259 Count | 4.06 VDC | 0 VDC |
| 1775245033 | 297 Count | 616 Count | 252 Count | 4.06 VDC | 0 VDC |
| 1775243235 | 290 Count | 596 Count | 246 Count | 4.06 VDC | 0 VDC |
| 1775241438 | 283 Count | 581 Count | 240 Count | 4.06 VDC | 0 VDC |
| 1775239640 | 276 Count | 564 Count | 234 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)