This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789397068 | 231 Count | 969 Count | 186 Count | 4.1 VDC | 5.56 VDC |
| 1789395271 | 225 Count | 963 Count | 181 Count | 4.1 VDC | 5.56 VDC |
| 1789393474 | 219 Count | 957 Count | 176 Count | 4.1 VDC | 5.58 VDC |
| 1789391676 | 195 Count | 933 Count | 153 Count | 4.1 VDC | 5.58 VDC |
| 1789389879 | 184 Count | 922 Count | 143 Count | 4.1 VDC | 5.58 VDC |
| 1789388081 | 178 Count | 916 Count | 138 Count | 4.1 VDC | 5.56 VDC |
| 1789386285 | 167 Count | 905 Count | 128 Count | 4.1 VDC | 5.56 VDC |
| 1789384487 | 161 Count | 899 Count | 123 Count | 4.1 VDC | 5.56 VDC |
| 1789382690 | 144 Count | 882 Count | 107 Count | 4.1 VDC | 5.56 VDC |
| 1789380895 | 138 Count | 876 Count | 102 Count | 4.1 VDC | 5.56 VDC |
| 1789379097 | 124 Count | 862 Count | 89 Count | 4.1 VDC | 5.56 VDC |
| 1789377299 | 121 Count | 859 Count | 87 Count | 4.1 VDC | 5.56 VDC |
| 1789375503 | 117 Count | 855 Count | 84 Count | 4.11 VDC | 5.56 VDC |
| 1789373706 | 113 Count | 851 Count | 81 Count | 4.1 VDC | 5.56 VDC |
| 1789371909 | 109 Count | 847 Count | 78 Count | 4.11 VDC | 5.56 VDC |
| 1789370111 | 105 Count | 843 Count | 75 Count | 4.11 VDC | 5.56 VDC |
| 1789368315 | 101 Count | 839 Count | 72 Count | 4.11 VDC | 4.44 VDC |
| 1789366518 | 97 Count | 835 Count | 69 Count | 4.1 VDC | 4.44 VDC |
| 1789362923 | 89 Count | 827 Count | 63 Count | 4.09 VDC | 4.44 VDC |
| 1789361127 | 85 Count | 823 Count | 60 Count | 4.09 VDC | 4.36 VDC |
| 1789355737 | 73 Count | 811 Count | 51 Count | 4.09 VDC | 0 VDC |
| 1789353940 | 69 Count | 807 Count | 48 Count | 4.09 VDC | 0 VDC |
| 1789352146 | 65 Count | 803 Count | 45 Count | 4.1 VDC | 0 VDC |
| 1789352136 | 60 Count | 803 Count | 45 Count | 4.1 VDC | 0 VDC |
| 1789350339 | 56 Count | 799 Count | 42 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)