This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766009127 | 161 Count | 616 Count | 76 Count | 4.1 VDC | 0 VDC |
| 1766008526 | 159 Count | 615 Count | 75 Count | 4.1 VDC | 0 VDC |
| 1766007925 | 157 Count | 612 Count | 74 Count | 4.1 VDC | 0 VDC |
| 1766007325 | 155 Count | 610 Count | 73 Count | 4.11 VDC | 0 VDC |
| 1766006724 | 153 Count | 608 Count | 72 Count | 4.11 VDC | 0 VDC |
| 1766006123 | 151 Count | 600 Count | 71 Count | 4.11 VDC | 0 VDC |
| 1766005522 | 149 Count | 598 Count | 70 Count | 4.11 VDC | 0 VDC |
| 1766004922 | 147 Count | 596 Count | 69 Count | 4.11 VDC | 0 VDC |
| 1766004321 | 145 Count | 593 Count | 68 Count | 4.11 VDC | 0 VDC |
| 1766003721 | 143 Count | 590 Count | 67 Count | 4.11 VDC | 0 VDC |
| 1766003120 | 141 Count | 588 Count | 66 Count | 4.11 VDC | 0 VDC |
| 1766002519 | 139 Count | 582 Count | 65 Count | 4.11 VDC | 0 VDC |
| 1766001919 | 137 Count | 570 Count | 64 Count | 4.12 VDC | 0 VDC |
| 1766001318 | 135 Count | 557 Count | 63 Count | 4.11 VDC | 0 VDC |
| 1766000717 | 133 Count | 546 Count | 62 Count | 4.12 VDC | 0 VDC |
| 1766000117 | 131 Count | 543 Count | 61 Count | 4.12 VDC | 0 VDC |
| 1765999516 | 129 Count | 541 Count | 60 Count | 4.12 VDC | 0 VDC |
| 1765998916 | 127 Count | 537 Count | 59 Count | 4.12 VDC | 0 VDC |
| 1765998344 | 121 Count | 534 Count | 58 Count | 4.12 VDC | 0 VDC |
| 1765997744 | 120 Count | 531 Count | 58 Count | 4.13 VDC | 0 VDC |
| 1765997143 | 118 Count | 527 Count | 57 Count | 4.13 VDC | 0 VDC |
| 1765996543 | 116 Count | 525 Count | 56 Count | 4.13 VDC | 0 VDC |
| 1765995942 | 114 Count | 521 Count | 55 Count | 4.11 VDC | 0 VDC |
| 1765995341 | 112 Count | 518 Count | 54 Count | 4.13 VDC | 0 VDC |
| 1765994741 | 110 Count | 514 Count | 53 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)