This is the latest recevied telemetry packets stored in our database for station/object SP1APG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765492492 | 750 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765490691 | 749 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765488891 | 748 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765487090 | 747 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765485290 | 746 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765483498 | 745 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765481696 | 744 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765479895 | 743 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765478095 | 742 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765476294 | 741 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765474493 | 740 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765472693 | 739 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765461896 | 733 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765460095 | 732 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765458294 | 731 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765456494 | 730 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765454693 | 729 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765452892 | 728 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765451092 | 727 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765449291 | 726 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765447490 | 725 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765445690 | 724 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765443889 | 723 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765442088 | 722 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
| 1765440295 | 721 Count | 54 Count | 54 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)