This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792522599 | 102 Count | 150 Count | 36 Count | 0 VDC | 0 VDC |
| 1792521698 | 99 Count | 146 Count | 34 Count | 0 VDC | 0 VDC |
| 1792520797 | 96 Count | 141 Count | 32 Count | 0 VDC | 0 VDC |
| 1792519895 | 93 Count | 137 Count | 30 Count | 0 VDC | 0 VDC |
| 1792518994 | 90 Count | 133 Count | 28 Count | 0 VDC | 0 VDC |
| 1792518093 | 87 Count | 129 Count | 26 Count | 0 VDC | 0 VDC |
| 1792517191 | 84 Count | 126 Count | 24 Count | 0 VDC | 0 VDC |
| 1792516290 | 81 Count | 122 Count | 22 Count | 0 VDC | 0 VDC |
| 1792515389 | 78 Count | 118 Count | 20 Count | 0 VDC | 0 VDC |
| 1792514487 | 75 Count | 115 Count | 18 Count | 0 VDC | 0 VDC |
| 1792513586 | 72 Count | 111 Count | 16 Count | 0 VDC | 0 VDC |
| 1792512718 | 69 Count | 108 Count | 14 Count | 0 VDC | 0 VDC |
| 1792511817 | 66 Count | 103 Count | 12 Count | 0 VDC | 0 VDC |
| 1792510915 | 63 Count | 100 Count | 10 Count | 0 VDC | 0 VDC |
| 1792510014 | 60 Count | 96 Count | 8 Count | 0 VDC | 0 VDC |
| 1792509113 | 41 Count | 77 Count | 6 Count | 0 VDC | 0 VDC |
| 1792508210 | 29 Count | 46 Count | 4 Count | 0 VDC | 0 VDC |
| 1792507309 | 16 Count | 25 Count | 2 Count | 0 VDC | 0 VDC |
| 1792506408 | 758 Count | 1015 Count | 391 Count | 0 VDC | 0 VDC |
| 1792505507 | 743 Count | 991 Count | 389 Count | 0 VDC | 0 VDC |
| 1792504605 | 732 Count | 973 Count | 387 Count | 0 VDC | 0 VDC |
| 1792503704 | 717 Count | 952 Count | 385 Count | 0 VDC | 0 VDC |
| 1792502802 | 701 Count | 931 Count | 381 Count | 0 VDC | 0 VDC |
| 1792501901 | 682 Count | 910 Count | 375 Count | 0 VDC | 0 VDC |
| 1792501000 | 664 Count | 893 Count | 368 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)