This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791537791 | 645 Count | 792 Count | 474 Count | 0 VDC | 0 VDC |
| 1791536890 | 642 Count | 789 Count | 472 Count | 0 VDC | 0 VDC |
| 1791535989 | 639 Count | 786 Count | 470 Count | 0 VDC | 0 VDC |
| 1791535087 | 636 Count | 783 Count | 468 Count | 0 VDC | 0 VDC |
| 1791534186 | 633 Count | 779 Count | 466 Count | 0 VDC | 0 VDC |
| 1791533285 | 630 Count | 775 Count | 464 Count | 0 VDC | 0 VDC |
| 1791532383 | 627 Count | 772 Count | 462 Count | 0 VDC | 0 VDC |
| 1791531482 | 624 Count | 768 Count | 460 Count | 0 VDC | 0 VDC |
| 1791530581 | 621 Count | 765 Count | 458 Count | 0 VDC | 0 VDC |
| 1791529680 | 618 Count | 761 Count | 456 Count | 0 VDC | 0 VDC |
| 1791528778 | 615 Count | 757 Count | 454 Count | 0 VDC | 0 VDC |
| 1791527877 | 612 Count | 755 Count | 452 Count | 0 VDC | 0 VDC |
| 1791526976 | 609 Count | 752 Count | 450 Count | 0 VDC | 0 VDC |
| 1791526074 | 606 Count | 749 Count | 448 Count | 0 VDC | 0 VDC |
| 1791525173 | 603 Count | 746 Count | 446 Count | 0 VDC | 0 VDC |
| 1791524272 | 600 Count | 743 Count | 444 Count | 0 VDC | 0 VDC |
| 1791523371 | 597 Count | 739 Count | 442 Count | 0 VDC | 0 VDC |
| 1791522469 | 594 Count | 735 Count | 440 Count | 0 VDC | 0 VDC |
| 1791521568 | 591 Count | 731 Count | 438 Count | 0 VDC | 0 VDC |
| 1791520667 | 588 Count | 728 Count | 436 Count | 0 VDC | 0 VDC |
| 1791519766 | 585 Count | 724 Count | 434 Count | 0 VDC | 0 VDC |
| 1791518895 | 582 Count | 720 Count | 432 Count | 0 VDC | 0 VDC |
| 1791517994 | 579 Count | 716 Count | 430 Count | 0 VDC | 0 VDC |
| 1791517093 | 576 Count | 712 Count | 428 Count | 0 VDC | 0 VDC |
| 1791516192 | 573 Count | 708 Count | 426 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)