This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767158918 | 518 Count | 798 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1767157114 | 517 Count | 791 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1767155310 | 516 Count | 780 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1767153550 | 515 Count | 763 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767151747 | 514 Count | 748 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767149943 | 513 Count | 728 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767148140 | 512 Count | 713 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767146336 | 511 Count | 692 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1767144532 | 510 Count | 678 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767142729 | 509 Count | 660 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767140925 | 508 Count | 648 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767139121 | 507 Count | 631 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767137318 | 506 Count | 616 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1767135514 | 505 Count | 600 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767133710 | 504 Count | 588 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767131949 | 503 Count | 577 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767130145 | 502 Count | 560 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1767128341 | 501 Count | 524 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767126538 | 500 Count | 505 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767124734 | 499 Count | 485 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1767122931 | 498 Count | 471 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767121127 | 497 Count | 415 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1767119323 | 496 Count | 394 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1767117520 | 495 Count | 378 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1767115716 | 494 Count | 360 Count | 0 Count | 4.25 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)