This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792524995 | 94 Count | 583 Count | 0 Count | 4 VDC | 0 VDC |
| 1792523195 | 88 Count | 544 Count | 0 Count | 4 VDC | 0 VDC |
| 1792519620 | 71 Count | 444 Count | 0 Count | 4 VDC | 0 VDC |
| 1792517819 | 67 Count | 395 Count | 0 Count | 4 VDC | 0 VDC |
| 1792516019 | 63 Count | 317 Count | 0 Count | 4 VDC | 0 VDC |
| 1792514218 | 55 Count | 243 Count | 0 Count | 4 VDC | 0 VDC |
| 1792512417 | 52 Count | 172 Count | 0 Count | 4 VDC | 0 VDC |
| 1792510617 | 48 Count | 124 Count | 0 Count | 4 VDC | 0 VDC |
| 1792508816 | 22 Count | 71 Count | 0 Count | 4 VDC | 0 VDC |
| 1792507014 | 343 Count | 1049 Count | 0 Count | 4 VDC | 0 VDC |
| 1792505214 | 313 Count | 974 Count | 0 Count | 4 VDC | 0 VDC |
| 1792503413 | 290 Count | 883 Count | 0 Count | 4 VDC | 0 VDC |
| 1792501613 | 259 Count | 833 Count | 0 Count | 4 VDC | 0 VDC |
| 1792499811 | 239 Count | 759 Count | 0 Count | 4 VDC | 0 VDC |
| 1792498011 | 215 Count | 707 Count | 0 Count | 4 VDC | 0 VDC |
| 1792496200 | 194 Count | 656 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1792494399 | 174 Count | 577 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1792492599 | 152 Count | 488 Count | 0 Count | 4 VDC | 0 VDC |
| 1792490798 | 132 Count | 367 Count | 0 Count | 4 VDC | 0 VDC |
| 1792488997 | 107 Count | 255 Count | 0 Count | 4 VDC | 0 VDC |
| 1792487196 | 85 Count | 138 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1792485395 | 62 Count | 92 Count | 0 Count | 4 VDC | 0 VDC |
| 1792483596 | 30 Count | 46 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1792481794 | 278 Count | 1052 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1792479993 | 245 Count | 1000 Count | 0 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)