This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775285776 | 35 Count | 283 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775283976 | 32 Count | 241 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775282175 | 28 Count | 194 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775280374 | 23 Count | 158 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775278574 | 15 Count | 103 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775276773 | 7 Count | 57 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775274972 | 165 Count | 1025 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775273171 | 158 Count | 970 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775271370 | 150 Count | 922 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775269570 | 142 Count | 867 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775267769 | 134 Count | 808 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775265968 | 126 Count | 750 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775264168 | 116 Count | 696 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775262367 | 108 Count | 644 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775260566 | 100 Count | 587 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775256980 | 81 Count | 485 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775255179 | 73 Count | 436 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775253379 | 65 Count | 383 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775251578 | 57 Count | 332 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775249777 | 50 Count | 283 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775247977 | 43 Count | 242 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775246176 | 35 Count | 197 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775244375 | 22 Count | 141 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1775242575 | 14 Count | 96 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1775240774 | 7 Count | 52 Count | 0 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)