This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764966097 | 88 Count | 583 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764964297 | 85 Count | 559 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764962496 | 81 Count | 528 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764960695 | 77 Count | 500 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764958894 | 73 Count | 465 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1764957094 | 69 Count | 437 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764955283 | 68 Count | 415 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764953479 | 67 Count | 396 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764951679 | 65 Count | 363 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764949878 | 64 Count | 329 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764948077 | 62 Count | 306 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764946277 | 60 Count | 276 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764944476 | 57 Count | 252 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1764942676 | 56 Count | 228 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764940875 | 54 Count | 203 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764939074 | 49 Count | 174 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764937274 | 29 Count | 111 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764935473 | 15 Count | 73 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764932747 | 145 Count | 1014 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764929162 | 134 Count | 954 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764927361 | 130 Count | 926 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764925561 | 127 Count | 900 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764923760 | 123 Count | 874 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764921959 | 121 Count | 850 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1764920159 | 120 Count | 825 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)