This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765521924 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1765519704 | 0 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1765517484 | 0 Count | 799 Count | 0 Count | 0 VDC | 0 VDC |
| 1765515264 | 0 Count | 731 Count | 0 Count | 0 VDC | 0 VDC |
| 1765513043 | 0 Count | 649 Count | 0 Count | 0 VDC | 0 VDC |
| 1765510823 | 0 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1765508603 | 0 Count | 511 Count | 0 Count | 0 VDC | 0 VDC |
| 1765506383 | 0 Count | 451 Count | 0 Count | 0 VDC | 0 VDC |
| 1765504163 | 0 Count | 385 Count | 0 Count | 0 VDC | 0 VDC |
| 1765501943 | 0 Count | 247 Count | 0 Count | 0 VDC | 0 VDC |
| 1765500324 | 0 Count | 170 Count | 0 Count | 0 VDC | 0 VDC |
| 1765498103 | 0 Count | 92 Count | 0 Count | 0 VDC | 0 VDC |
| 1765495883 | 0 Count | 1033 Count | 0 Count | 0 VDC | 0 VDC |
| 1765493663 | 0 Count | 927 Count | 0 Count | 0 VDC | 0 VDC |
| 1765491443 | 0 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
| 1765489223 | 0 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1765487003 | 0 Count | 703 Count | 0 Count | 0 VDC | 0 VDC |
| 1765484783 | 0 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1765482563 | 0 Count | 556 Count | 0 Count | 0 VDC | 0 VDC |
| 1765480343 | 0 Count | 455 Count | 0 Count | 0 VDC | 0 VDC |
| 1765478722 | 0 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1765476502 | 0 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
| 1765474282 | 0 Count | 195 Count | 0 Count | 0 VDC | 0 VDC |
| 1765472062 | 0 Count | 123 Count | 0 Count | 0 VDC | 0 VDC |
| 1765469842 | 0 Count | 1040 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)