This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774976800 | 167 Count | 237 Count | 137 Count | 0 VDC | 0 VDC |
| 1774974992 | 132 Count | 177 Count | 109 Count | 0 VDC | 0 VDC |
| 1774974543 | 129 Count | 174 Count | 107 Count | 0 VDC | 0 VDC |
| 1774972739 | 83 Count | 111 Count | 68 Count | 0 VDC | 0 VDC |
| 1774970935 | 35 Count | 53 Count | 28 Count | 0 VDC | 0 VDC |
| 1774968017 | 637 Count | 1021 Count | 497 Count | 0 VDC | 0 VDC |
| 1774966214 | 600 Count | 960 Count | 467 Count | 0 VDC | 0 VDC |
| 1774964410 | 563 Count | 901 Count | 438 Count | 0 VDC | 0 VDC |
| 1774962606 | 520 Count | 839 Count | 402 Count | 0 VDC | 0 VDC |
| 1774960802 | 481 Count | 777 Count | 371 Count | 0 VDC | 0 VDC |
| 1774958998 | 438 Count | 719 Count | 335 Count | 0 VDC | 0 VDC |
| 1774957831 | 437 Count | 719 Count | 335 Count | 0 VDC | 0 VDC |
| 1774902783 | 434 Count | 715 Count | 333 Count | 0 VDC | 0 VDC |
| 1774900979 | 393 Count | 659 Count | 301 Count | 0 VDC | 0 VDC |
| 1774899176 | 362 Count | 606 Count | 280 Count | 0 VDC | 0 VDC |
| 1774897369 | 328 Count | 561 Count | 254 Count | 0 VDC | 0 VDC |
| 1774895565 | 295 Count | 503 Count | 230 Count | 0 VDC | 0 VDC |
| 1774893761 | 262 Count | 450 Count | 206 Count | 0 VDC | 0 VDC |
| 1774891961 | 232 Count | 397 Count | 183 Count | 0 VDC | 0 VDC |
| 1774890158 | 203 Count | 347 Count | 162 Count | 0 VDC | 0 VDC |
| 1774886556 | 132 Count | 189 Count | 107 Count | 0 VDC | 0 VDC |
| 1774884749 | 77 Count | 99 Count | 63 Count | 0 VDC | 0 VDC |
| 1774882943 | 28 Count | 39 Count | 21 Count | 0 VDC | 0 VDC |
| 1774882810 | 27 Count | 39 Count | 21 Count | 0 VDC | 0 VDC |
| 1774881003 | 640 Count | 1058 Count | 502 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)