This is the latest recevied telemetry packets stored in our database for station/object F4MLV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX* | Relay* | Drop* | Value5* |
|---|---|---|---|---|---|
| 1787091361 | 4.19 VDC | 186 pkt | 69 pkt | 117 pkt | 0 |
| 1787087767 | 4.19 VDC | 197 pkt | 74 pkt | 123 pkt | 0 |
| 1787084174 | 4.2 VDC | 168 pkt | 63 pkt | 105 pkt | 0 |
| 1787080580 | 4.19 VDC | 160 pkt | 78 pkt | 82 pkt | 0 |
| 1787076988 | 4.19 VDC | 157 pkt | 81 pkt | 76 pkt | 0 |
| 1787073397 | 4.2 VDC | 167 pkt | 76 pkt | 91 pkt | 0 |
| 1787069804 | 4.19 VDC | 175 pkt | 78 pkt | 97 pkt | 0 |
| 1787066216 | 4.19 VDC | 219 pkt | 90 pkt | 129 pkt | 0 |
| 1787062617 | 4.2 VDC | 142 pkt | 70 pkt | 72 pkt | 0 |
| 1787059007 | 4.19 VDC | 176 pkt | 85 pkt | 91 pkt | 0 |
| 1787055413 | 4.19 VDC | 194 pkt | 88 pkt | 106 pkt | 0 |
| 1787051819 | 4.2 VDC | 168 pkt | 73 pkt | 95 pkt | 0 |
| 1787048233 | 4.19 VDC | 172 pkt | 70 pkt | 102 pkt | 0 |
| 1787044641 | 4.21 VDC | 166 pkt | 68 pkt | 98 pkt | 0 |
| 1787041041 | 4.2 VDC | 176 pkt | 66 pkt | 110 pkt | 0 |
| 1787037447 | 4.19 VDC | 165 pkt | 79 pkt | 86 pkt | 0 |
| 1787033855 | 4.2 VDC | 159 pkt | 70 pkt | 89 pkt | 0 |
| 1787030261 | 4.2 VDC | 170 pkt | 72 pkt | 98 pkt | 0 |
| 1787026667 | 4.2 VDC | 183 pkt | 73 pkt | 110 pkt | 0 |
| 1787023074 | 4.2 VDC | 170 pkt | 75 pkt | 95 pkt | 0 |
| 1787019481 | 4.21 VDC | 169 pkt | 80 pkt | 89 pkt | 0 |
| 1787015888 | 4.2 VDC | 166 pkt | 72 pkt | 94 pkt | 0 |
| 1787008701 | 4.2 VDC | 158 pkt | 78 pkt | 80 pkt | 0 |
| 1787005108 | 4.19 VDC | 181 pkt | 80 pkt | 101 pkt | 0 |
| 1787001516 | 4.2 VDC | 170 pkt | 73 pkt | 97 pkt | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX: 0, 1, 0
Relay: 0, 1, 0
Drop: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)