This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788104726 | 194 Count | 53 Count | 47 Count | 0 VDC | 0 VDC |
| 1788103045 | 172 Count | 41 Count | 41 Count | 0 VDC | 0 VDC |
| 1788101365 | 153 Count | 36 Count | 36 Count | 0 VDC | 0 VDC |
| 1788099684 | 132 Count | 31 Count | 31 Count | 0 VDC | 0 VDC |
| 1788098003 | 109 Count | 27 Count | 27 Count | 0 VDC | 0 VDC |
| 1788096322 | 87 Count | 22 Count | 22 Count | 0 VDC | 0 VDC |
| 1788094641 | 62 Count | 16 Count | 16 Count | 0 VDC | 0 VDC |
| 1788092961 | 43 Count | 11 Count | 11 Count | 0 VDC | 0 VDC |
| 1788091280 | 20 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1788089599 | 1007 Count | 331 Count | 309 Count | 0 VDC | 0 VDC |
| 1788087918 | 986 Count | 326 Count | 304 Count | 0 VDC | 0 VDC |
| 1788086237 | 968 Count | 322 Count | 300 Count | 0 VDC | 0 VDC |
| 1788084806 | 947 Count | 317 Count | 295 Count | 0 VDC | 0 VDC |
| 1788083125 | 924 Count | 312 Count | 290 Count | 0 VDC | 0 VDC |
| 1788081444 | 874 Count | 292 Count | 271 Count | 0 VDC | 0 VDC |
| 1788079764 | 826 Count | 273 Count | 253 Count | 0 VDC | 0 VDC |
| 1788078083 | 786 Count | 259 Count | 239 Count | 0 VDC | 0 VDC |
| 1788076402 | 739 Count | 241 Count | 221 Count | 0 VDC | 0 VDC |
| 1788074721 | 694 Count | 223 Count | 203 Count | 0 VDC | 0 VDC |
| 1788073040 | 662 Count | 212 Count | 194 Count | 0 VDC | 0 VDC |
| 1788071360 | 638 Count | 206 Count | 188 Count | 0 VDC | 0 VDC |
| 1788069679 | 616 Count | 201 Count | 183 Count | 0 VDC | 0 VDC |
| 1788067998 | 583 Count | 189 Count | 172 Count | 0 VDC | 0 VDC |
| 1788066317 | 563 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1788064637 | 544 Count | 180 Count | 163 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)