This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793300827 | 90 Count | 206 Count | 20 Count | 0 VDC | 0 VDC |
| 1793299027 | 68 Count | 152 Count | 14 Count | 0 VDC | 0 VDC |
| 1793297226 | 48 Count | 116 Count | 10 Count | 0 VDC | 0 VDC |
| 1793295425 | 25 Count | 70 Count | 5 Count | 0 VDC | 0 VDC |
| 1793291832 | 660 Count | 968 Count | 123 Count | 0 VDC | 0 VDC |
| 1793290031 | 633 Count | 914 Count | 118 Count | 0 VDC | 0 VDC |
| 1793288231 | 607 Count | 853 Count | 113 Count | 0 VDC | 0 VDC |
| 1793286430 | 585 Count | 813 Count | 107 Count | 0 VDC | 0 VDC |
| 1793284629 | 562 Count | 771 Count | 102 Count | 0 VDC | 0 VDC |
| 1793282828 | 540 Count | 717 Count | 96 Count | 0 VDC | 0 VDC |
| 1793281028 | 518 Count | 684 Count | 91 Count | 0 VDC | 0 VDC |
| 1793279227 | 490 Count | 651 Count | 86 Count | 0 VDC | 0 VDC |
| 1793277426 | 452 Count | 604 Count | 80 Count | 0 VDC | 0 VDC |
| 1793275625 | 433 Count | 573 Count | 78 Count | 0 VDC | 0 VDC |
| 1793273820 | 401 Count | 533 Count | 76 Count | 0 VDC | 0 VDC |
| 1793272024 | 369 Count | 495 Count | 71 Count | 0 VDC | 0 VDC |
| 1793259355 | 166 Count | 248 Count | 32 Count | 0 VDC | 0 VDC |
| 1793257554 | 128 Count | 210 Count | 24 Count | 0 VDC | 0 VDC |
| 1793255753 | 97 Count | 142 Count | 19 Count | 0 VDC | 0 VDC |
| 1793253953 | 68 Count | 100 Count | 14 Count | 0 VDC | 0 VDC |
| 1793252152 | 41 Count | 51 Count | 10 Count | 0 VDC | 0 VDC |
| 1793250351 | 683 Count | 1006 Count | 122 Count | 0 VDC | 0 VDC |
| 1793248550 | 647 Count | 958 Count | 115 Count | 0 VDC | 0 VDC |
| 1793246749 | 617 Count | 917 Count | 110 Count | 0 VDC | 0 VDC |
| 1793244949 | 584 Count | 873 Count | 104 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)