This is the latest recevied telemetry packets stored in our database for station/object OK0HCS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775282826 | 17 Count | 529 Count | 0 Count | 0 VDC | 0 VDC |
| 1775281059 | 16 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1775279256 | 15 Count | 465 Count | 0 Count | 0 VDC | 0 VDC |
| 1775277453 | 13 Count | 433 Count | 0 Count | 0 VDC | 0 VDC |
| 1775275650 | 12 Count | 407 Count | 0 Count | 0 VDC | 0 VDC |
| 1775273847 | 11 Count | 382 Count | 0 Count | 0 VDC | 0 VDC |
| 1775272044 | 10 Count | 349 Count | 0 Count | 0 VDC | 0 VDC |
| 1775270241 | 9 Count | 310 Count | 0 Count | 0 VDC | 0 VDC |
| 1775268438 | 8 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1775266635 | 7 Count | 246 Count | 0 Count | 0 VDC | 0 VDC |
| 1775264831 | 6 Count | 213 Count | 0 Count | 0 VDC | 0 VDC |
| 1775263028 | 5 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1775261225 | 4 Count | 147 Count | 0 Count | 0 VDC | 0 VDC |
| 1775259458 | 3 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
| 1775257655 | 2 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1775255852 | 0 Count | 34 Count | 0 Count | 0 VDC | 0 VDC |
| 1775254049 | 31 Count | 1009 Count | 0 Count | 0 VDC | 0 VDC |
| 1775252246 | 30 Count | 978 Count | 0 Count | 0 VDC | 0 VDC |
| 1775250443 | 29 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1775248640 | 28 Count | 911 Count | 0 Count | 0 VDC | 0 VDC |
| 1775246837 | 27 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
| 1775245034 | 26 Count | 846 Count | 0 Count | 0 VDC | 0 VDC |
| 1775243231 | 25 Count | 813 Count | 0 Count | 0 VDC | 0 VDC |
| 1775241428 | 24 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1775239624 | 23 Count | 756 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)