This is the latest recevied telemetry packets stored in our database for station/object SP6DJA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765494959 | 17 Count | 25 Count | 2 Count | 0 VDC | 0 VDC |
| 1765494779 | 15 Count | 22 Count | 1 Count | 0 VDC | 0 VDC |
| 1765494418 | 13 Count | 19 Count | 1 Count | 0 VDC | 0 VDC |
| 1765494237 | 12 Count | 18 Count | 1 Count | 0 VDC | 0 VDC |
| 1765494057 | 11 Count | 17 Count | 1 Count | 0 VDC | 0 VDC |
| 1765493876 | 10 Count | 15 Count | 1 Count | 0 VDC | 0 VDC |
| 1765493696 | 9 Count | 13 Count | 1 Count | 0 VDC | 0 VDC |
| 1765493334 | 7 Count | 11 Count | 1 Count | 0 VDC | 0 VDC |
| 1765493154 | 6 Count | 10 Count | 1 Count | 0 VDC | 0 VDC |
| 1765492973 | 4 Count | 7 Count | 0 Count | 0 VDC | 0 VDC |
| 1765492793 | 3 Count | 5 Count | 0 Count | 0 VDC | 0 VDC |
| 1765492612 | 2 Count | 4 Count | 0 Count | 0 VDC | 0 VDC |
| 1765491890 | 526 Count | 1000 Count | 122 Count | 0 VDC | 0 VDC |
| 1765491709 | 525 Count | 999 Count | 122 Count | 0 VDC | 0 VDC |
| 1765490987 | 520 Count | 992 Count | 121 Count | 0 VDC | 0 VDC |
| 1765489362 | 510 Count | 979 Count | 120 Count | 0 VDC | 0 VDC |
| 1765487915 | 502 Count | 966 Count | 120 Count | 0 VDC | 0 VDC |
| 1765487734 | 501 Count | 964 Count | 120 Count | 0 VDC | 0 VDC |
| 1765487553 | 499 Count | 958 Count | 119 Count | 0 VDC | 0 VDC |
| 1765487372 | 498 Count | 956 Count | 119 Count | 0 VDC | 0 VDC |
| 1765487192 | 497 Count | 955 Count | 119 Count | 0 VDC | 0 VDC |
| 1765487011 | 496 Count | 953 Count | 119 Count | 0 VDC | 0 VDC |
| 1765486831 | 495 Count | 949 Count | 119 Count | 0 VDC | 0 VDC |
| 1765486650 | 494 Count | 947 Count | 119 Count | 0 VDC | 0 VDC |
| 1765486470 | 492 Count | 942 Count | 118 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)