This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794949109 | 423 Count | 899 Count | 255 Count | 4.18 VDC | 0 VDC |
| 1794948508 | 418 Count | 891 Count | 253 Count | 4.14 VDC | 0 VDC |
| 1794947907 | 413 Count | 880 Count | 250 Count | 4.15 VDC | 0 VDC |
| 1794947306 | 406 Count | 872 Count | 246 Count | 4.14 VDC | 0 VDC |
| 1794946706 | 401 Count | 861 Count | 243 Count | 4.15 VDC | 0 VDC |
| 1794946105 | 393 Count | 850 Count | 238 Count | 4.15 VDC | 0 VDC |
| 1794945505 | 388 Count | 839 Count | 235 Count | 4.16 VDC | 0 VDC |
| 1794944904 | 380 Count | 827 Count | 230 Count | 4.16 VDC | 0 VDC |
| 1794944303 | 374 Count | 817 Count | 226 Count | 4.15 VDC | 0 VDC |
| 1794943702 | 370 Count | 805 Count | 224 Count | 4.14 VDC | 0 VDC |
| 1794943102 | 364 Count | 795 Count | 221 Count | 4.15 VDC | 0 VDC |
| 1794942501 | 359 Count | 783 Count | 218 Count | 4.15 VDC | 0 VDC |
| 1794941901 | 353 Count | 768 Count | 215 Count | 4.13 VDC | 0 VDC |
| 1794941300 | 348 Count | 756 Count | 212 Count | 4.15 VDC | 0 VDC |
| 1794940699 | 343 Count | 744 Count | 210 Count | 4.15 VDC | 0 VDC |
| 1794940099 | 339 Count | 736 Count | 208 Count | 4.17 VDC | 0 VDC |
| 1794939498 | 335 Count | 728 Count | 206 Count | 4.13 VDC | 0 VDC |
| 1794938898 | 328 Count | 711 Count | 202 Count | 4.17 VDC | 0 VDC |
| 1794938297 | 322 Count | 691 Count | 199 Count | 4.11 VDC | 0 VDC |
| 1794937697 | 316 Count | 679 Count | 196 Count | 4.13 VDC | 0 VDC |
| 1794937096 | 310 Count | 666 Count | 192 Count | 4.12 VDC | 0 VDC |
| 1794936495 | 304 Count | 639 Count | 189 Count | 4.12 VDC | 0 VDC |
| 1794935894 | 295 Count | 622 Count | 182 Count | 4.12 VDC | 0 VDC |
| 1794935294 | 290 Count | 607 Count | 179 Count | 4.12 VDC | 0 VDC |
| 1794934693 | 283 Count | 581 Count | 175 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)