This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793309970 | 45 Count | 85 Count | 29 Count | 4.13 VDC | 0 VDC |
| 1793309370 | 41 Count | 76 Count | 27 Count | 4.13 VDC | 0 VDC |
| 1793308769 | 33 Count | 63 Count | 21 Count | 4.13 VDC | 0 VDC |
| 1793308168 | 26 Count | 46 Count | 17 Count | 4.12 VDC | 0 VDC |
| 1793307568 | 21 Count | 38 Count | 14 Count | 4.13 VDC | 0 VDC |
| 1793306967 | 11 Count | 22 Count | 7 Count | 4.12 VDC | 0 VDC |
| 1793306366 | 5 Count | 10 Count | 3 Count | 4.13 VDC | 0 VDC |
| 1793305766 | 626 Count | 1012 Count | 421 Count | 4.14 VDC | 0 VDC |
| 1793305165 | 621 Count | 999 Count | 418 Count | 4.15 VDC | 0 VDC |
| 1793304564 | 615 Count | 985 Count | 414 Count | 4.13 VDC | 0 VDC |
| 1793303964 | 608 Count | 975 Count | 410 Count | 4.14 VDC | 0 VDC |
| 1793303363 | 598 Count | 960 Count | 402 Count | 4.14 VDC | 0 VDC |
| 1793302762 | 590 Count | 947 Count | 397 Count | 4.13 VDC | 0 VDC |
| 1793302162 | 587 Count | 938 Count | 396 Count | 4.13 VDC | 0 VDC |
| 1793301561 | 579 Count | 925 Count | 391 Count | 4.13 VDC | 0 VDC |
| 1793300960 | 574 Count | 916 Count | 388 Count | 4.15 VDC | 0 VDC |
| 1793300360 | 571 Count | 911 Count | 387 Count | 4.13 VDC | 0 VDC |
| 1793299759 | 565 Count | 898 Count | 384 Count | 4.13 VDC | 0 VDC |
| 1793299159 | 559 Count | 889 Count | 380 Count | 4.13 VDC | 0 VDC |
| 1793298558 | 554 Count | 878 Count | 378 Count | 4.13 VDC | 0 VDC |
| 1793297957 | 549 Count | 871 Count | 375 Count | 4.13 VDC | 0 VDC |
| 1793297357 | 543 Count | 860 Count | 372 Count | 4.13 VDC | 0 VDC |
| 1793296756 | 540 Count | 856 Count | 371 Count | 4.13 VDC | 0 VDC |
| 1793296155 | 535 Count | 847 Count | 368 Count | 4.12 VDC | 0 VDC |
| 1793295555 | 528 Count | 838 Count | 364 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)