This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782076404 | 313 Count | 844 Count | 256 Count | 0 VDC | 0 VDC |
| 1782074603 | 308 Count | 831 Count | 252 Count | 0 VDC | 0 VDC |
| 1782072803 | 303 Count | 820 Count | 248 Count | 0 VDC | 0 VDC |
| 1782071002 | 299 Count | 807 Count | 245 Count | 0 VDC | 0 VDC |
| 1782069201 | 294 Count | 796 Count | 241 Count | 0 VDC | 0 VDC |
| 1782067401 | 289 Count | 784 Count | 237 Count | 0 VDC | 0 VDC |
| 1782065600 | 284 Count | 769 Count | 233 Count | 0 VDC | 0 VDC |
| 1782063799 | 279 Count | 758 Count | 229 Count | 0 VDC | 0 VDC |
| 1782061999 | 274 Count | 746 Count | 225 Count | 0 VDC | 0 VDC |
| 1782060198 | 267 Count | 724 Count | 219 Count | 0 VDC | 0 VDC |
| 1782058397 | 262 Count | 711 Count | 215 Count | 0 VDC | 0 VDC |
| 1782056596 | 257 Count | 700 Count | 211 Count | 0 VDC | 0 VDC |
| 1782054804 | 252 Count | 687 Count | 207 Count | 0 VDC | 0 VDC |
| 1782053003 | 247 Count | 674 Count | 203 Count | 0 VDC | 0 VDC |
| 1782051202 | 242 Count | 661 Count | 199 Count | 0 VDC | 0 VDC |
| 1782049402 | 237 Count | 643 Count | 195 Count | 0 VDC | 0 VDC |
| 1782047601 | 232 Count | 630 Count | 191 Count | 0 VDC | 0 VDC |
| 1782045800 | 227 Count | 618 Count | 187 Count | 0 VDC | 0 VDC |
| 1782043999 | 222 Count | 603 Count | 183 Count | 0 VDC | 0 VDC |
| 1782042199 | 217 Count | 591 Count | 179 Count | 0 VDC | 0 VDC |
| 1782040398 | 212 Count | 579 Count | 175 Count | 0 VDC | 0 VDC |
| 1782038597 | 205 Count | 556 Count | 169 Count | 0 VDC | 0 VDC |
| 1782036797 | 200 Count | 543 Count | 165 Count | 0 VDC | 0 VDC |
| 1782034996 | 195 Count | 529 Count | 161 Count | 0 VDC | 0 VDC |
| 1782033202 | 188 Count | 515 Count | 155 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)