This is the latest recevied telemetry packets stored in our database for station/object IU3ISP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770153184 | 41 Count | 254 Count | 15 Count | 0 VDC | 0 VDC |
| 1770151381 | 40 Count | 254 Count | 15 Count | 0 VDC | 0 VDC |
| 1770149577 | 39 Count | 254 Count | 15 Count | 0 VDC | 0 VDC |
| 1770140601 | 23 Count | 110 Count | 8 Count | 0 VDC | 0 VDC |
| 1770136993 | 18 Count | 59 Count | 5 Count | 0 VDC | 0 VDC |
| 1770133385 | 16 Count | 59 Count | 5 Count | 0 VDC | 0 VDC |
| 1770129778 | 13 Count | 28 Count | 4 Count | 0 VDC | 0 VDC |
| 1770127974 | 11 Count | 22 Count | 3 Count | 0 VDC | 0 VDC |
| 1770118998 | 250 Count | 1003 Count | 186 Count | 0 VDC | 0 VDC |
| 1770117194 | 245 Count | 977 Count | 182 Count | 0 VDC | 0 VDC |
| 1770115390 | 240 Count | 935 Count | 178 Count | 0 VDC | 0 VDC |
| 1770113587 | 235 Count | 907 Count | 174 Count | 0 VDC | 0 VDC |
| 1770111783 | 233 Count | 906 Count | 173 Count | 0 VDC | 0 VDC |
| 1770109979 | 231 Count | 905 Count | 172 Count | 0 VDC | 0 VDC |
| 1770108175 | 228 Count | 903 Count | 170 Count | 0 VDC | 0 VDC |
| 1770106371 | 224 Count | 879 Count | 167 Count | 0 VDC | 0 VDC |
| 1770104612 | 215 Count | 848 Count | 163 Count | 0 VDC | 0 VDC |
| 1770102808 | 211 Count | 815 Count | 160 Count | 0 VDC | 0 VDC |
| 1770101004 | 206 Count | 772 Count | 156 Count | 0 VDC | 0 VDC |
| 1770099200 | 203 Count | 737 Count | 154 Count | 0 VDC | 0 VDC |
| 1770093789 | 194 Count | 718 Count | 148 Count | 0 VDC | 0 VDC |
| 1770091985 | 191 Count | 716 Count | 146 Count | 0 VDC | 0 VDC |
| 1770090180 | 190 Count | 715 Count | 146 Count | 0 VDC | 0 VDC |
| 1770086572 | 185 Count | 712 Count | 143 Count | 0 VDC | 0 VDC |
| 1770083008 | 176 Count | 708 Count | 140 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)