This is the latest recevied telemetry packets stored in our database for station/object SR2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792447257 | 32 Count | 167 Count | 26 Count | 0 VDC | 0 VDC |
| 1792425649 | 291 Count | 856 Count | 268 Count | 0 VDC | 0 VDC |
| 1792423849 | 282 Count | 824 Count | 260 Count | 0 VDC | 0 VDC |
| 1792422048 | 268 Count | 778 Count | 247 Count | 0 VDC | 0 VDC |
| 1792420247 | 257 Count | 740 Count | 237 Count | 0 VDC | 0 VDC |
| 1792418447 | 247 Count | 710 Count | 228 Count | 0 VDC | 0 VDC |
| 1792416646 | 236 Count | 679 Count | 218 Count | 0 VDC | 0 VDC |
| 1792414845 | 223 Count | 647 Count | 206 Count | 0 VDC | 0 VDC |
| 1792413045 | 213 Count | 612 Count | 197 Count | 0 VDC | 0 VDC |
| 1792411244 | 200 Count | 571 Count | 185 Count | 0 VDC | 0 VDC |
| 1792409472 | 156 Count | 503 Count | 146 Count | 0 VDC | 0 VDC |
| 1792407671 | 140 Count | 446 Count | 131 Count | 0 VDC | 0 VDC |
| 1792405871 | 124 Count | 392 Count | 116 Count | 0 VDC | 0 VDC |
| 1792404070 | 116 Count | 331 Count | 109 Count | 0 VDC | 0 VDC |
| 1792402270 | 100 Count | 278 Count | 94 Count | 0 VDC | 0 VDC |
| 1792400469 | 87 Count | 234 Count | 82 Count | 0 VDC | 0 VDC |
| 1792398668 | 73 Count | 177 Count | 69 Count | 0 VDC | 0 VDC |
| 1792396868 | 65 Count | 145 Count | 62 Count | 0 VDC | 0 VDC |
| 1792395067 | 56 Count | 112 Count | 54 Count | 0 VDC | 0 VDC |
| 1792393266 | 47 Count | 85 Count | 46 Count | 0 VDC | 0 VDC |
| 1792391466 | 33 Count | 51 Count | 33 Count | 0 VDC | 0 VDC |
| 1792389665 | 262 Count | 1028 Count | 230 Count | 0 VDC | 0 VDC |
| 1792387864 | 253 Count | 986 Count | 222 Count | 0 VDC | 0 VDC |
| 1792386064 | 239 Count | 936 Count | 209 Count | 0 VDC | 0 VDC |
| 1792384263 | 230 Count | 907 Count | 201 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)