This is the latest recevied telemetry packets stored in our database for station/object SR2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769607937 | 415 Count | 874 Count | 388 Count | 0 VDC | 0 VDC |
| 1769606137 | 375 Count | 785 Count | 349 Count | 0 VDC | 0 VDC |
| 1769604336 | 339 Count | 705 Count | 314 Count | 0 VDC | 0 VDC |
| 1769602535 | 294 Count | 635 Count | 280 Count | 0 VDC | 0 VDC |
| 1769600735 | 271 Count | 582 Count | 258 Count | 0 VDC | 0 VDC |
| 1769598934 | 247 Count | 529 Count | 235 Count | 0 VDC | 0 VDC |
| 1769597133 | 224 Count | 476 Count | 213 Count | 0 VDC | 0 VDC |
| 1769595333 | 197 Count | 419 Count | 187 Count | 0 VDC | 0 VDC |
| 1769593532 | 174 Count | 370 Count | 165 Count | 0 VDC | 0 VDC |
| 1769591731 | 151 Count | 317 Count | 143 Count | 0 VDC | 0 VDC |
| 1769589931 | 132 Count | 261 Count | 125 Count | 0 VDC | 0 VDC |
| 1769588130 | 106 Count | 208 Count | 100 Count | 0 VDC | 0 VDC |
| 1769586330 | 55 Count | 116 Count | 50 Count | 0 VDC | 0 VDC |
| 1769584529 | 27 Count | 57 Count | 23 Count | 0 VDC | 0 VDC |
| 1769532363 | 143 Count | 305 Count | 139 Count | 0 VDC | 0 VDC |
| 1769530563 | 118 Count | 248 Count | 115 Count | 0 VDC | 0 VDC |
| 1769528761 | 93 Count | 183 Count | 91 Count | 0 VDC | 0 VDC |
| 1769526960 | 73 Count | 137 Count | 72 Count | 0 VDC | 0 VDC |
| 1769525160 | 21 Count | 46 Count | 21 Count | 0 VDC | 0 VDC |
| 1769523359 | 470 Count | 1052 Count | 446 Count | 0 VDC | 0 VDC |
| 1769521558 | 432 Count | 993 Count | 409 Count | 0 VDC | 0 VDC |
| 1769519758 | 415 Count | 951 Count | 393 Count | 0 VDC | 0 VDC |
| 1769517957 | 402 Count | 921 Count | 381 Count | 0 VDC | 0 VDC |
| 1769516156 | 367 Count | 853 Count | 347 Count | 0 VDC | 0 VDC |
| 1769514356 | 352 Count | 817 Count | 333 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)