This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787101105 | 1 Count | 812 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787097505 | 1 Count | 802 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787093905 | 1 Count | 791 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787090305 | 1 Count | 771 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787086704 | 1 Count | 760 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787083104 | 1 Count | 752 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787079504 | 1 Count | 743 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787075904 | 1 Count | 735 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787072304 | 1 Count | 727 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787068704 | 1 Count | 719 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787065104 | 1 Count | 711 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787061503 | 1 Count | 687 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787057903 | 1 Count | 679 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787054303 | 1 Count | 671 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787050703 | 1 Count | 662 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787047104 | 1 Count | 648 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787043504 | 1 Count | 639 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787039904 | 1 Count | 631 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787036304 | 1 Count | 623 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787032704 | 1 Count | 613 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787029104 | 1 Count | 587 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787025503 | 1 Count | 578 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787021903 | 1 Count | 570 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787018303 | 1 Count | 562 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1787014703 | 1 Count | 553 Count | 0 Count | 3.92 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)