This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791032789 | 117 Count | 820 Count | 109 Count | 0 VDC | 0 VDC |
| 1791030988 | 102 Count | 682 Count | 95 Count | 0 VDC | 0 VDC |
| 1791029187 | 88 Count | 548 Count | 82 Count | 0 VDC | 0 VDC |
| 1791027387 | 72 Count | 427 Count | 68 Count | 0 VDC | 0 VDC |
| 1791025586 | 61 Count | 303 Count | 58 Count | 0 VDC | 0 VDC |
| 1791023785 | 54 Count | 193 Count | 52 Count | 0 VDC | 0 VDC |
| 1791021985 | 37 Count | 136 Count | 36 Count | 0 VDC | 0 VDC |
| 1791018383 | 233 Count | 1051 Count | 217 Count | 0 VDC | 0 VDC |
| 1791016583 | 215 Count | 987 Count | 200 Count | 0 VDC | 0 VDC |
| 1791014782 | 195 Count | 909 Count | 181 Count | 0 VDC | 0 VDC |
| 1791012981 | 176 Count | 827 Count | 163 Count | 0 VDC | 0 VDC |
| 1791011181 | 157 Count | 745 Count | 145 Count | 0 VDC | 0 VDC |
| 1791009380 | 140 Count | 665 Count | 129 Count | 0 VDC | 0 VDC |
| 1791007579 | 122 Count | 585 Count | 112 Count | 0 VDC | 0 VDC |
| 1791005779 | 104 Count | 499 Count | 95 Count | 0 VDC | 0 VDC |
| 1791003978 | 87 Count | 402 Count | 79 Count | 0 VDC | 0 VDC |
| 1791002177 | 68 Count | 292 Count | 61 Count | 0 VDC | 0 VDC |
| 1791000377 | 49 Count | 212 Count | 43 Count | 0 VDC | 0 VDC |
| 1790998575 | 33 Count | 141 Count | 28 Count | 0 VDC | 0 VDC |
| 1790996775 | 19 Count | 64 Count | 15 Count | 0 VDC | 0 VDC |
| 1790994989 | 228 Count | 1053 Count | 214 Count | 0 VDC | 0 VDC |
| 1790993189 | 213 Count | 988 Count | 200 Count | 0 VDC | 0 VDC |
| 1790991388 | 198 Count | 916 Count | 186 Count | 0 VDC | 0 VDC |
| 1790989587 | 183 Count | 846 Count | 172 Count | 0 VDC | 0 VDC |
| 1790987786 | 167 Count | 787 Count | 157 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)