This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773520092 | 22 Count | 78 Count | 22 Count | 0 VDC | 0 VDC |
| 1773518292 | 226 Count | 1043 Count | 211 Count | 0 VDC | 0 VDC |
| 1773516491 | 203 Count | 965 Count | 189 Count | 0 VDC | 0 VDC |
| 1773514690 | 183 Count | 829 Count | 170 Count | 0 VDC | 0 VDC |
| 1773512890 | 163 Count | 696 Count | 151 Count | 0 VDC | 0 VDC |
| 1773511089 | 140 Count | 605 Count | 129 Count | 0 VDC | 0 VDC |
| 1773509288 | 118 Count | 518 Count | 108 Count | 0 VDC | 0 VDC |
| 1773507488 | 97 Count | 415 Count | 88 Count | 0 VDC | 0 VDC |
| 1773460700 | 205 Count | 661 Count | 196 Count | 0 VDC | 0 VDC |
| 1773458899 | 183 Count | 588 Count | 175 Count | 0 VDC | 0 VDC |
| 1773457098 | 163 Count | 519 Count | 156 Count | 0 VDC | 0 VDC |
| 1773455297 | 143 Count | 445 Count | 137 Count | 0 VDC | 0 VDC |
| 1773453496 | 121 Count | 369 Count | 116 Count | 0 VDC | 0 VDC |
| 1773451696 | 102 Count | 302 Count | 98 Count | 0 VDC | 0 VDC |
| 1773449895 | 80 Count | 240 Count | 77 Count | 0 VDC | 0 VDC |
| 1773448094 | 59 Count | 178 Count | 57 Count | 0 VDC | 0 VDC |
| 1773446294 | 40 Count | 122 Count | 39 Count | 0 VDC | 0 VDC |
| 1773444493 | 21 Count | 58 Count | 21 Count | 0 VDC | 0 VDC |
| 1773442693 | 243 Count | 1035 Count | 233 Count | 0 VDC | 0 VDC |
| 1773440892 | 223 Count | 978 Count | 214 Count | 0 VDC | 0 VDC |
| 1773439091 | 201 Count | 916 Count | 193 Count | 0 VDC | 0 VDC |
| 1773437291 | 179 Count | 851 Count | 172 Count | 0 VDC | 0 VDC |
| 1773435490 | 160 Count | 787 Count | 154 Count | 0 VDC | 0 VDC |
| 1773433689 | 141 Count | 733 Count | 136 Count | 0 VDC | 0 VDC |
| 1773431889 | 122 Count | 649 Count | 118 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)