This is the latest recevied telemetry packets stored in our database for station/object F5ZYM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788120823 | 194 Count | 258 Count | 179 Count | 0 VDC | 0 VDC |
| 1788120017 | 190 Count | 253 Count | 176 Count | 0 VDC | 0 VDC |
| 1788119113 | 186 Count | 247 Count | 173 Count | 0 VDC | 0 VDC |
| 1788118209 | 183 Count | 242 Count | 171 Count | 0 VDC | 0 VDC |
| 1788117305 | 180 Count | 237 Count | 169 Count | 0 VDC | 0 VDC |
| 1788116400 | 176 Count | 231 Count | 166 Count | 0 VDC | 0 VDC |
| 1788115496 | 172 Count | 226 Count | 163 Count | 0 VDC | 0 VDC |
| 1788114592 | 168 Count | 219 Count | 160 Count | 0 VDC | 0 VDC |
| 1788113688 | 144 Count | 183 Count | 137 Count | 0 VDC | 0 VDC |
| 1788112784 | 99 Count | 130 Count | 93 Count | 0 VDC | 0 VDC |
| 1788111880 | 74 Count | 104 Count | 69 Count | 0 VDC | 0 VDC |
| 1788110976 | 69 Count | 97 Count | 65 Count | 0 VDC | 0 VDC |
| 1788110072 | 63 Count | 90 Count | 60 Count | 0 VDC | 0 VDC |
| 1788109168 | 43 Count | 67 Count | 41 Count | 0 VDC | 0 VDC |
| 1788108263 | 9 Count | 20 Count | 8 Count | 0 VDC | 0 VDC |
| 1788107359 | 3 Count | 5 Count | 3 Count | 0 VDC | 0 VDC |
| 1788106455 | 677 Count | 1002 Count | 553 Count | 0 VDC | 0 VDC |
| 1788105551 | 674 Count | 992 Count | 551 Count | 0 VDC | 0 VDC |
| 1788104646 | 670 Count | 986 Count | 548 Count | 0 VDC | 0 VDC |
| 1788103742 | 666 Count | 979 Count | 545 Count | 0 VDC | 0 VDC |
| 1788102838 | 662 Count | 972 Count | 542 Count | 0 VDC | 0 VDC |
| 1788101934 | 659 Count | 967 Count | 540 Count | 0 VDC | 0 VDC |
| 1788101030 | 656 Count | 961 Count | 538 Count | 0 VDC | 0 VDC |
| 1788100126 | 653 Count | 955 Count | 536 Count | 0 VDC | 0 VDC |
| 1788099222 | 650 Count | 950 Count | 534 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)