This is the latest recevied telemetry packets stored in our database for station/object F5ZYM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789359299 | 88 Count | 143 Count | 78 Count | 0 VDC | 0 VDC |
| 1789358395 | 81 Count | 123 Count | 72 Count | 0 VDC | 0 VDC |
| 1789357491 | 72 Count | 108 Count | 64 Count | 0 VDC | 0 VDC |
| 1789356587 | 64 Count | 96 Count | 57 Count | 0 VDC | 0 VDC |
| 1789355683 | 55 Count | 86 Count | 49 Count | 0 VDC | 0 VDC |
| 1789354778 | 48 Count | 74 Count | 43 Count | 0 VDC | 0 VDC |
| 1789353874 | 38 Count | 60 Count | 34 Count | 0 VDC | 0 VDC |
| 1789352970 | 30 Count | 47 Count | 27 Count | 0 VDC | 0 VDC |
| 1789352066 | 22 Count | 34 Count | 20 Count | 0 VDC | 0 VDC |
| 1789351260 | 15 Count | 25 Count | 14 Count | 0 VDC | 0 VDC |
| 1789350356 | 7 Count | 14 Count | 7 Count | 0 VDC | 0 VDC |
| 1789349452 | 782 Count | 1010 Count | 707 Count | 0 VDC | 0 VDC |
| 1789348548 | 773 Count | 996 Count | 699 Count | 0 VDC | 0 VDC |
| 1789347644 | 764 Count | 985 Count | 691 Count | 0 VDC | 0 VDC |
| 1789346739 | 759 Count | 974 Count | 687 Count | 0 VDC | 0 VDC |
| 1789345835 | 752 Count | 960 Count | 681 Count | 0 VDC | 0 VDC |
| 1789344931 | 744 Count | 946 Count | 674 Count | 0 VDC | 0 VDC |
| 1789344027 | 737 Count | 935 Count | 668 Count | 0 VDC | 0 VDC |
| 1789343123 | 732 Count | 926 Count | 664 Count | 0 VDC | 0 VDC |
| 1789342218 | 726 Count | 916 Count | 659 Count | 0 VDC | 0 VDC |
| 1789341314 | 717 Count | 904 Count | 651 Count | 0 VDC | 0 VDC |
| 1789340410 | 711 Count | 897 Count | 646 Count | 0 VDC | 0 VDC |
| 1789339506 | 703 Count | 885 Count | 639 Count | 0 VDC | 0 VDC |
| 1789338602 | 697 Count | 875 Count | 634 Count | 0 VDC | 0 VDC |
| 1789337698 | 689 Count | 863 Count | 627 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)