This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782053026 | 329 Count | 863 Count | 243 Count | 4.17 VDC | 0.14 VDC |
| 1782052120 | 325 Count | 856 Count | 240 Count | 4.16 VDC | 0.14 VDC |
| 1782051211 | 324 Count | 850 Count | 240 Count | 4.17 VDC | 0.14 VDC |
| 1782050302 | 322 Count | 846 Count | 239 Count | 4.17 VDC | 0.14 VDC |
| 1782049397 | 319 Count | 833 Count | 237 Count | 4.17 VDC | 0.14 VDC |
| 1782048491 | 311 Count | 807 Count | 230 Count | 4.17 VDC | 0.14 VDC |
| 1782047588 | 308 Count | 800 Count | 228 Count | 4.21 VDC | 0.14 VDC |
| 1782046678 | 306 Count | 794 Count | 227 Count | 4.17 VDC | 0.14 VDC |
| 1782044861 | 299 Count | 783 Count | 222 Count | 4.17 VDC | 0.14 VDC |
| 1782043957 | 296 Count | 778 Count | 220 Count | 4.16 VDC | 0.14 VDC |
| 1782043050 | 291 Count | 771 Count | 216 Count | 4.16 VDC | 0.14 VDC |
| 1782042145 | 288 Count | 764 Count | 214 Count | 4.2 VDC | 0.14 VDC |
| 1782041235 | 286 Count | 757 Count | 213 Count | 4.16 VDC | 0.14 VDC |
| 1782040325 | 284 Count | 751 Count | 212 Count | 4.17 VDC | 0.14 VDC |
| 1782039421 | 281 Count | 747 Count | 210 Count | 4.15 VDC | 0.14 VDC |
| 1782038518 | 278 Count | 742 Count | 208 Count | 4.16 VDC | 0.14 VDC |
| 1782037615 | 275 Count | 735 Count | 206 Count | 4.21 VDC | 0.14 VDC |
| 1782036706 | 274 Count | 727 Count | 206 Count | 4.2 VDC | 0.14 VDC |
| 1782035801 | 271 Count | 720 Count | 204 Count | 4.2 VDC | 0.14 VDC |
| 1782034898 | 268 Count | 712 Count | 202 Count | 4.2 VDC | 0.14 VDC |
| 1782033993 | 265 Count | 706 Count | 200 Count | 4.2 VDC | 0.14 VDC |
| 1782033089 | 263 Count | 697 Count | 199 Count | 4.2 VDC | 0.14 VDC |
| 1782032185 | 260 Count | 690 Count | 197 Count | 4.19 VDC | 0.14 VDC |
| 1782029610 | 243 Count | 666 Count | 187 Count | 4.18 VDC | 0.14 VDC |
| 1782028702 | 238 Count | 640 Count | 183 Count | 4.11 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)