This is the latest recevied telemetry packets stored in our database for station/object SQ2WSZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765593117 | 328 Count | 396 Count | 75 Count | 0 VDC | 0 VDC |
| 1765593088 | 328 Count | 396 Count | 75 Count | 0 VDC | 0 VDC |
| 1765593063 | 328 Count | 396 Count | 75 Count | 0 VDC | 0 VDC |
| 1765591990 | 327 Count | 396 Count | 75 Count | 0 VDC | 0 VDC |
| 1765590789 | 324 Count | 391 Count | 74 Count | 0 VDC | 0 VDC |
| 1765589588 | 322 Count | 385 Count | 73 Count | 0 VDC | 0 VDC |
| 1765588388 | 321 Count | 380 Count | 73 Count | 0 VDC | 0 VDC |
| 1765587187 | 319 Count | 375 Count | 72 Count | 0 VDC | 0 VDC |
| 1765585986 | 316 Count | 369 Count | 71 Count | 0 VDC | 0 VDC |
| 1765584786 | 315 Count | 364 Count | 71 Count | 0 VDC | 0 VDC |
| 1765583585 | 313 Count | 358 Count | 70 Count | 0 VDC | 0 VDC |
| 1765582384 | 310 Count | 352 Count | 69 Count | 0 VDC | 0 VDC |
| 1765581184 | 309 Count | 347 Count | 69 Count | 0 VDC | 0 VDC |
| 1765579983 | 307 Count | 341 Count | 68 Count | 0 VDC | 0 VDC |
| 1765578783 | 304 Count | 334 Count | 67 Count | 0 VDC | 0 VDC |
| 1765577582 | 303 Count | 328 Count | 67 Count | 0 VDC | 0 VDC |
| 1765576381 | 301 Count | 323 Count | 66 Count | 0 VDC | 0 VDC |
| 1765575181 | 299 Count | 317 Count | 65 Count | 0 VDC | 0 VDC |
| 1765573980 | 297 Count | 311 Count | 65 Count | 0 VDC | 0 VDC |
| 1765572779 | 295 Count | 305 Count | 64 Count | 0 VDC | 0 VDC |
| 1765571579 | 293 Count | 298 Count | 63 Count | 0 VDC | 0 VDC |
| 1765570385 | 291 Count | 293 Count | 63 Count | 0 VDC | 0 VDC |
| 1765569185 | 289 Count | 288 Count | 63 Count | 0 VDC | 0 VDC |
| 1765567984 | 287 Count | 282 Count | 62 Count | 0 VDC | 0 VDC |
| 1765566783 | 285 Count | 276 Count | 62 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)