This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792515765 | 302 Count | 1003 Count | 219 Count | 4.23 VDC | 0.14 VDC |
| 1792515464 | 301 Count | 999 Count | 219 Count | 4.24 VDC | 0.14 VDC |
| 1792515164 | 300 Count | 992 Count | 219 Count | 4.23 VDC | 0.14 VDC |
| 1792514863 | 298 Count | 989 Count | 218 Count | 4.27 VDC | 0.14 VDC |
| 1792514563 | 297 Count | 981 Count | 218 Count | 4.24 VDC | 0.14 VDC |
| 1792514262 | 296 Count | 977 Count | 218 Count | 4.24 VDC | 0.14 VDC |
| 1792513962 | 294 Count | 972 Count | 217 Count | 4.23 VDC | 0.14 VDC |
| 1792513661 | 293 Count | 967 Count | 217 Count | 4.23 VDC | 0.14 VDC |
| 1792513361 | 292 Count | 960 Count | 217 Count | 4.23 VDC | 0.14 VDC |
| 1792513060 | 290 Count | 958 Count | 216 Count | 4.22 VDC | 0.14 VDC |
| 1792512760 | 289 Count | 955 Count | 216 Count | 4.21 VDC | 0.14 VDC |
| 1792512459 | 288 Count | 950 Count | 216 Count | 4.23 VDC | 0.14 VDC |
| 1792512158 | 286 Count | 944 Count | 215 Count | 4.24 VDC | 0.14 VDC |
| 1792511858 | 285 Count | 938 Count | 215 Count | 4.27 VDC | 0.14 VDC |
| 1792511557 | 284 Count | 931 Count | 215 Count | 4.25 VDC | 0.14 VDC |
| 1792511257 | 282 Count | 926 Count | 214 Count | 4.22 VDC | 0.14 VDC |
| 1792510956 | 280 Count | 917 Count | 213 Count | 4.2 VDC | 0.14 VDC |
| 1792510655 | 279 Count | 912 Count | 213 Count | 4.23 VDC | 0.14 VDC |
| 1792510354 | 277 Count | 904 Count | 212 Count | 4.23 VDC | 0.14 VDC |
| 1792510054 | 276 Count | 903 Count | 212 Count | 4.28 VDC | 0.14 VDC |
| 1792509753 | 274 Count | 886 Count | 211 Count | 4.27 VDC | 0.14 VDC |
| 1792509452 | 271 Count | 877 Count | 209 Count | 4.2 VDC | 0.14 VDC |
| 1792509152 | 262 Count | 853 Count | 201 Count | 4.25 VDC | 0.14 VDC |
| 1792508851 | 260 Count | 848 Count | 200 Count | 4.23 VDC | 0.14 VDC |
| 1792508551 | 255 Count | 836 Count | 196 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)