This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791068494 | 259 Count | 756 Count | 156 Count | 4.19 VDC | 0.14 VDC |
| 1791068193 | 256 Count | 751 Count | 154 Count | 4.24 VDC | 0.14 VDC |
| 1791067893 | 253 Count | 743 Count | 152 Count | 4.21 VDC | 0.14 VDC |
| 1791067592 | 252 Count | 733 Count | 152 Count | 4.21 VDC | 0.14 VDC |
| 1791067291 | 248 Count | 727 Count | 149 Count | 4.21 VDC | 0.14 VDC |
| 1791066991 | 247 Count | 723 Count | 149 Count | 4.19 VDC | 0.14 VDC |
| 1791066690 | 243 Count | 718 Count | 146 Count | 4.19 VDC | 0.14 VDC |
| 1791066390 | 241 Count | 712 Count | 145 Count | 4.19 VDC | 0.14 VDC |
| 1791066089 | 239 Count | 706 Count | 144 Count | 4.2 VDC | 0.14 VDC |
| 1791065788 | 234 Count | 697 Count | 140 Count | 4.23 VDC | 0.14 VDC |
| 1791065487 | 232 Count | 693 Count | 139 Count | 4.22 VDC | 0.14 VDC |
| 1791065187 | 228 Count | 685 Count | 136 Count | 4.24 VDC | 0.14 VDC |
| 1791064886 | 225 Count | 675 Count | 134 Count | 4.25 VDC | 0.14 VDC |
| 1791064586 | 222 Count | 669 Count | 132 Count | 4.23 VDC | 0.14 VDC |
| 1791064285 | 220 Count | 662 Count | 131 Count | 4.27 VDC | 0.14 VDC |
| 1791063984 | 218 Count | 655 Count | 130 Count | 4.21 VDC | 0.14 VDC |
| 1791063683 | 216 Count | 650 Count | 129 Count | 4.2 VDC | 0.14 VDC |
| 1791063383 | 213 Count | 643 Count | 127 Count | 4.23 VDC | 0.14 VDC |
| 1791063082 | 212 Count | 639 Count | 127 Count | 4.24 VDC | 0.14 VDC |
| 1791062782 | 209 Count | 630 Count | 125 Count | 4.22 VDC | 0.14 VDC |
| 1791062481 | 207 Count | 623 Count | 124 Count | 4.24 VDC | 0.14 VDC |
| 1791062181 | 205 Count | 615 Count | 123 Count | 4.25 VDC | 0.14 VDC |
| 1791061880 | 202 Count | 611 Count | 121 Count | 4.26 VDC | 0.14 VDC |
| 1791061578 | 200 Count | 604 Count | 120 Count | 4.25 VDC | 0.14 VDC |
| 1791061278 | 197 Count | 596 Count | 118 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)