This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791030356 | 176 Count | 757 Count | 100 Count | 4.27 VDC | 0.14 VDC |
| 1791030056 | 174 Count | 749 Count | 99 Count | 4.25 VDC | 0.14 VDC |
| 1791029755 | 172 Count | 737 Count | 98 Count | 4.19 VDC | 0.14 VDC |
| 1791029455 | 170 Count | 731 Count | 97 Count | 4.26 VDC | 0.14 VDC |
| 1791029154 | 168 Count | 722 Count | 96 Count | 4.23 VDC | 0.14 VDC |
| 1791028895 | 163 Count | 716 Count | 96 Count | 4.22 VDC | 0.14 VDC |
| 1791028595 | 159 Count | 704 Count | 93 Count | 4.23 VDC | 0.14 VDC |
| 1791028294 | 157 Count | 702 Count | 92 Count | 4.2 VDC | 0.14 VDC |
| 1791027994 | 156 Count | 695 Count | 92 Count | 4.19 VDC | 0.14 VDC |
| 1791027693 | 152 Count | 684 Count | 89 Count | 4.2 VDC | 0.14 VDC |
| 1791027393 | 151 Count | 682 Count | 89 Count | 4.23 VDC | 0.14 VDC |
| 1791027092 | 148 Count | 672 Count | 87 Count | 4.21 VDC | 0.14 VDC |
| 1791026791 | 146 Count | 659 Count | 86 Count | 4.24 VDC | 0.14 VDC |
| 1791026490 | 143 Count | 652 Count | 84 Count | 4.22 VDC | 0.14 VDC |
| 1791026190 | 141 Count | 643 Count | 83 Count | 4.22 VDC | 0.14 VDC |
| 1791025890 | 139 Count | 636 Count | 82 Count | 4.24 VDC | 0.14 VDC |
| 1791025589 | 138 Count | 630 Count | 82 Count | 4.23 VDC | 0.14 VDC |
| 1791025288 | 134 Count | 618 Count | 79 Count | 4.22 VDC | 0.14 VDC |
| 1791024987 | 130 Count | 608 Count | 76 Count | 4.21 VDC | 0.14 VDC |
| 1791024386 | 126 Count | 596 Count | 74 Count | 4.2 VDC | 0.14 VDC |
| 1791024085 | 124 Count | 591 Count | 73 Count | 4.25 VDC | 0.14 VDC |
| 1791023484 | 119 Count | 582 Count | 70 Count | 4.21 VDC | 0.14 VDC |
| 1791023184 | 116 Count | 574 Count | 68 Count | 4.22 VDC | 0.14 VDC |
| 1791022883 | 112 Count | 565 Count | 65 Count | 4.23 VDC | 0.14 VDC |
| 1791022583 | 111 Count | 557 Count | 65 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)