This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792559592 | 364 Count | 286 Count | 167 Count | 4.21 VDC | 0 VDC |
| 1792558691 | 362 Count | 285 Count | 166 Count | 4.24 VDC | 0 VDC |
| 1792557790 | 359 Count | 282 Count | 164 Count | 4.25 VDC | 0 VDC |
| 1792556889 | 347 Count | 271 Count | 153 Count | 4.25 VDC | 0 VDC |
| 1792555988 | 341 Count | 264 Count | 148 Count | 4.22 VDC | 0 VDC |
| 1792555087 | 339 Count | 259 Count | 147 Count | 4.25 VDC | 0 VDC |
| 1792554186 | 336 Count | 256 Count | 145 Count | 4.24 VDC | 0 VDC |
| 1792553285 | 334 Count | 255 Count | 144 Count | 4.21 VDC | 0 VDC |
| 1792552384 | 332 Count | 254 Count | 143 Count | 4.26 VDC | 0 VDC |
| 1792551484 | 330 Count | 253 Count | 142 Count | 4.23 VDC | 0 VDC |
| 1792550583 | 328 Count | 252 Count | 141 Count | 4.23 VDC | 0 VDC |
| 1792549682 | 325 Count | 250 Count | 139 Count | 4.23 VDC | 0 VDC |
| 1792548781 | 323 Count | 249 Count | 138 Count | 4.26 VDC | 0 VDC |
| 1792547880 | 321 Count | 248 Count | 137 Count | 4.26 VDC | 0 VDC |
| 1792546979 | 319 Count | 247 Count | 136 Count | 4.26 VDC | 0 VDC |
| 1792546078 | 317 Count | 246 Count | 135 Count | 4.23 VDC | 0 VDC |
| 1792545177 | 315 Count | 245 Count | 134 Count | 4.23 VDC | 0 VDC |
| 1792544277 | 313 Count | 244 Count | 133 Count | 4.24 VDC | 0 VDC |
| 1792543376 | 311 Count | 243 Count | 132 Count | 4.21 VDC | 0 VDC |
| 1792542475 | 309 Count | 242 Count | 131 Count | 4.25 VDC | 0 VDC |
| 1792541574 | 308 Count | 242 Count | 131 Count | 4.23 VDC | 0 VDC |
| 1792540673 | 306 Count | 241 Count | 130 Count | 4.24 VDC | 0 VDC |
| 1792539772 | 304 Count | 240 Count | 129 Count | 4.22 VDC | 0 VDC |
| 1792538872 | 301 Count | 238 Count | 127 Count | 4.24 VDC | 0 VDC |
| 1792537971 | 299 Count | 237 Count | 126 Count | 4.24 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)