This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776474847 | 291 Count | 170 Count | 110 Count | 4.2 VDC | 0 VDC |
| 1776473946 | 290 Count | 170 Count | 110 Count | 4.17 VDC | 0 VDC |
| 1776473045 | 289 Count | 169 Count | 110 Count | 4.19 VDC | 0 VDC |
| 1776472144 | 288 Count | 168 Count | 110 Count | 4.18 VDC | 0 VDC |
| 1776471244 | 286 Count | 167 Count | 109 Count | 4.18 VDC | 0 VDC |
| 1776470343 | 285 Count | 167 Count | 109 Count | 4.19 VDC | 0 VDC |
| 1776469442 | 284 Count | 167 Count | 109 Count | 4.19 VDC | 0 VDC |
| 1776468541 | 283 Count | 167 Count | 109 Count | 4.18 VDC | 0 VDC |
| 1776467640 | 282 Count | 167 Count | 109 Count | 4.18 VDC | 0 VDC |
| 1776466739 | 281 Count | 167 Count | 109 Count | 4.19 VDC | 0 VDC |
| 1776465839 | 280 Count | 167 Count | 109 Count | 4.18 VDC | 0 VDC |
| 1776464938 | 279 Count | 167 Count | 109 Count | 4.19 VDC | 0 VDC |
| 1776464037 | 276 Count | 165 Count | 107 Count | 4.2 VDC | 0 VDC |
| 1776463136 | 275 Count | 163 Count | 107 Count | 4.19 VDC | 0 VDC |
| 1776462235 | 272 Count | 161 Count | 105 Count | 4.2 VDC | 0 VDC |
| 1776461334 | 271 Count | 161 Count | 105 Count | 4.19 VDC | 0 VDC |
| 1776460433 | 269 Count | 159 Count | 104 Count | 4.17 VDC | 0 VDC |
| 1776459533 | 266 Count | 157 Count | 102 Count | 4.19 VDC | 0 VDC |
| 1776458632 | 265 Count | 157 Count | 102 Count | 4.21 VDC | 0 VDC |
| 1776457731 | 264 Count | 157 Count | 102 Count | 4.22 VDC | 0 VDC |
| 1776456830 | 263 Count | 157 Count | 102 Count | 4.21 VDC | 0 VDC |
| 1776455929 | 262 Count | 157 Count | 102 Count | 4.22 VDC | 0 VDC |
| 1776455028 | 261 Count | 157 Count | 102 Count | 4.22 VDC | 0 VDC |
| 1776453227 | 259 Count | 157 Count | 102 Count | 4.19 VDC | 0 VDC |
| 1776452326 | 258 Count | 157 Count | 102 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)