This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777424896 | 880 Count | 503 Count | 273 Count | 4.18 VDC | 0 VDC |
| 1777423995 | 876 Count | 496 Count | 270 Count | 4.22 VDC | 0 VDC |
| 1777423094 | 872 Count | 490 Count | 267 Count | 4.2 VDC | 0 VDC |
| 1777422193 | 864 Count | 481 Count | 260 Count | 4.19 VDC | 0 VDC |
| 1777421292 | 859 Count | 473 Count | 256 Count | 4.2 VDC | 0 VDC |
| 1777420392 | 855 Count | 466 Count | 253 Count | 4.18 VDC | 0 VDC |
| 1777419490 | 850 Count | 459 Count | 249 Count | 4.21 VDC | 0 VDC |
| 1777418589 | 846 Count | 454 Count | 246 Count | 4.2 VDC | 0 VDC |
| 1777417688 | 844 Count | 452 Count | 245 Count | 4.17 VDC | 0 VDC |
| 1777416787 | 841 Count | 450 Count | 243 Count | 4.2 VDC | 0 VDC |
| 1777415886 | 840 Count | 450 Count | 243 Count | 4.17 VDC | 0 VDC |
| 1777414986 | 838 Count | 449 Count | 242 Count | 4.17 VDC | 0 VDC |
| 1777414085 | 837 Count | 449 Count | 242 Count | 4.19 VDC | 0 VDC |
| 1777413184 | 836 Count | 449 Count | 242 Count | 4.21 VDC | 0 VDC |
| 1777412283 | 835 Count | 449 Count | 242 Count | 4.21 VDC | 0 VDC |
| 1777411382 | 834 Count | 449 Count | 242 Count | 4.22 VDC | 0 VDC |
| 1777410481 | 833 Count | 449 Count | 242 Count | 4.19 VDC | 0 VDC |
| 1777409581 | 832 Count | 448 Count | 242 Count | 4.18 VDC | 0 VDC |
| 1777408680 | 830 Count | 447 Count | 241 Count | 4.18 VDC | 0 VDC |
| 1777407779 | 828 Count | 442 Count | 240 Count | 4.21 VDC | 0 VDC |
| 1777406878 | 827 Count | 440 Count | 240 Count | 4.22 VDC | 0 VDC |
| 1777405977 | 826 Count | 435 Count | 240 Count | 4.19 VDC | 0 VDC |
| 1777405076 | 825 Count | 433 Count | 240 Count | 4.23 VDC | 0 VDC |
| 1777404175 | 824 Count | 432 Count | 240 Count | 4.2 VDC | 0 VDC |
| 1777403275 | 823 Count | 430 Count | 240 Count | 4.2 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)