This is the latest recevied telemetry packets stored in our database for station/object SQ9IWE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789357339 | 8 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1789355544 | 2 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1789353745 | 26 Count | 1002 Count | 0 Count | 0 VDC | 0 VDC |
| 1789351942 | 23 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1789350141 | 20 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1789348341 | 17 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1789346540 | 14 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1789344739 | 11 Count | 402 Count | 0 Count | 0 VDC | 0 VDC |
| 1789342938 | 8 Count | 273 Count | 0 Count | 0 VDC | 0 VDC |
| 1789341143 | 2 Count | 136 Count | 0 Count | 0 VDC | 0 VDC |
| 1789339342 | 25 Count | 1054 Count | 0 Count | 0 VDC | 0 VDC |
| 1789337541 | 22 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1789335741 | 19 Count | 798 Count | 0 Count | 0 VDC | 0 VDC |
| 1789333940 | 16 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1789332139 | 13 Count | 526 Count | 0 Count | 0 VDC | 0 VDC |
| 1789330338 | 10 Count | 412 Count | 0 Count | 0 VDC | 0 VDC |
| 1789328537 | 7 Count | 299 Count | 0 Count | 0 VDC | 0 VDC |
| 1789326742 | 2 Count | 185 Count | 0 Count | 0 VDC | 0 VDC |
| 1789324941 | 24 Count | 1129 Count | 0 Count | 0 VDC | 0 VDC |
| 1789323140 | 21 Count | 966 Count | 0 Count | 0 VDC | 0 VDC |
| 1789321340 | 18 Count | 821 Count | 0 Count | 0 VDC | 0 VDC |
| 1789319539 | 15 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1789317738 | 12 Count | 416 Count | 0 Count | 0 VDC | 0 VDC |
| 1789315937 | 9 Count | 236 Count | 0 Count | 0 VDC | 0 VDC |
| 1789314137 | 5 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)