This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785892809 | 153 Count | 941 Count | 16 Count | 0 VDC | 0 VDC |
| 1785892208 | 152 Count | 938 Count | 16 Count | 0 VDC | 0 VDC |
| 1785891608 | 151 Count | 936 Count | 16 Count | 0 VDC | 0 VDC |
| 1785891007 | 150 Count | 935 Count | 16 Count | 0 VDC | 0 VDC |
| 1785890406 | 149 Count | 932 Count | 16 Count | 0 VDC | 0 VDC |
| 1785889805 | 148 Count | 931 Count | 16 Count | 0 VDC | 0 VDC |
| 1785889205 | 147 Count | 930 Count | 16 Count | 0 VDC | 0 VDC |
| 1785888604 | 146 Count | 927 Count | 16 Count | 0 VDC | 0 VDC |
| 1785888003 | 145 Count | 926 Count | 16 Count | 0 VDC | 0 VDC |
| 1785887402 | 144 Count | 925 Count | 16 Count | 0 VDC | 0 VDC |
| 1785886801 | 143 Count | 923 Count | 16 Count | 0 VDC | 0 VDC |
| 1785886200 | 142 Count | 922 Count | 16 Count | 0 VDC | 0 VDC |
| 1785885600 | 141 Count | 921 Count | 16 Count | 0 VDC | 0 VDC |
| 1785884999 | 140 Count | 919 Count | 16 Count | 0 VDC | 0 VDC |
| 1785884398 | 139 Count | 918 Count | 16 Count | 0 VDC | 0 VDC |
| 1785883797 | 138 Count | 917 Count | 16 Count | 0 VDC | 0 VDC |
| 1785883197 | 137 Count | 915 Count | 16 Count | 0 VDC | 0 VDC |
| 1785882596 | 136 Count | 910 Count | 16 Count | 0 VDC | 0 VDC |
| 1785881995 | 135 Count | 908 Count | 16 Count | 0 VDC | 0 VDC |
| 1785881394 | 134 Count | 906 Count | 16 Count | 0 VDC | 0 VDC |
| 1785880794 | 133 Count | 905 Count | 16 Count | 0 VDC | 0 VDC |
| 1785880193 | 132 Count | 904 Count | 16 Count | 0 VDC | 0 VDC |
| 1785879592 | 131 Count | 902 Count | 16 Count | 0 VDC | 0 VDC |
| 1785878991 | 130 Count | 901 Count | 16 Count | 0 VDC | 0 VDC |
| 1785878390 | 126 Count | 894 Count | 13 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)