This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792533243 | 26 Count | 104 Count | 25 Count | 4.08 VDC | 0 VDC |
| 1792531442 | 11 Count | 52 Count | 11 Count | 4.08 VDC | 0 VDC |
| 1792529642 | 291 Count | 1009 Count | 274 Count | 4.08 VDC | 0 VDC |
| 1792527841 | 282 Count | 967 Count | 266 Count | 4.09 VDC | 0 VDC |
| 1792526040 | 271 Count | 926 Count | 256 Count | 4.1 VDC | 0 VDC |
| 1792524240 | 259 Count | 873 Count | 245 Count | 4.09 VDC | 0 VDC |
| 1792522439 | 247 Count | 817 Count | 234 Count | 4.07 VDC | 0 VDC |
| 1792520638 | 228 Count | 738 Count | 216 Count | 4.09 VDC | 0 VDC |
| 1792518837 | 213 Count | 687 Count | 202 Count | 4.1 VDC | 0 VDC |
| 1792517037 | 199 Count | 627 Count | 189 Count | 4.06 VDC | 0 VDC |
| 1792515236 | 182 Count | 560 Count | 173 Count | 4.07 VDC | 0 VDC |
| 1792513443 | 166 Count | 510 Count | 162 Count | 4.09 VDC | 0 VDC |
| 1792511643 | 147 Count | 438 Count | 144 Count | 4.08 VDC | 0 VDC |
| 1792509842 | 129 Count | 380 Count | 127 Count | 4.09 VDC | 0 VDC |
| 1792508041 | 81 Count | 243 Count | 80 Count | 4.06 VDC | 0 VDC |
| 1792506241 | 41 Count | 126 Count | 41 Count | 4.1 VDC | 0 VDC |
| 1792504440 | 369 Count | 1084 Count | 356 Count | 4.09 VDC | 0 VDC |
| 1792502639 | 330 Count | 975 Count | 318 Count | 4.09 VDC | 0 VDC |
| 1792500838 | 290 Count | 863 Count | 279 Count | 4.06 VDC | 0 VDC |
| 1792499038 | 258 Count | 761 Count | 248 Count | 4.1 VDC | 0 VDC |
| 1792497237 | 221 Count | 654 Count | 212 Count | 4.08 VDC | 0 VDC |
| 1792495436 | 182 Count | 559 Count | 174 Count | 4.06 VDC | 0 VDC |
| 1792493636 | 137 Count | 437 Count | 130 Count | 4.09 VDC | 0 VDC |
| 1792491843 | 105 Count | 336 Count | 103 Count | 4.1 VDC | 0 VDC |
| 1792490042 | 73 Count | 224 Count | 72 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)