This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794948891 | 158 Count | 572 Count | 143 Count | 4.07 VDC | 0 VDC |
| 1794947090 | 143 Count | 533 Count | 129 Count | 4.06 VDC | 0 VDC |
| 1794945289 | 127 Count | 490 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1794943488 | 112 Count | 436 Count | 100 Count | 4.07 VDC | 0 VDC |
| 1794941688 | 100 Count | 390 Count | 89 Count | 4.1 VDC | 0 VDC |
| 1794939887 | 86 Count | 340 Count | 76 Count | 4.04 VDC | 0 VDC |
| 1794938086 | 75 Count | 300 Count | 66 Count | 4.07 VDC | 0 VDC |
| 1794936285 | 59 Count | 239 Count | 51 Count | 4.07 VDC | 0 VDC |
| 1794934485 | 48 Count | 175 Count | 41 Count | 4.09 VDC | 0 VDC |
| 1794932692 | 33 Count | 132 Count | 31 Count | 4.06 VDC | 0 VDC |
| 1794930892 | 23 Count | 95 Count | 22 Count | 4.1 VDC | 0 VDC |
| 1794929091 | 10 Count | 48 Count | 10 Count | 4.05 VDC | 0 VDC |
| 1794927290 | 294 Count | 1003 Count | 272 Count | 4.07 VDC | 0 VDC |
| 1794925489 | 282 Count | 965 Count | 261 Count | 4.08 VDC | 0 VDC |
| 1794923689 | 271 Count | 918 Count | 251 Count | 4.07 VDC | 0 VDC |
| 1794921888 | 252 Count | 856 Count | 233 Count | 4.09 VDC | 0 VDC |
| 1794920087 | 237 Count | 797 Count | 219 Count | 4.05 VDC | 0 VDC |
| 1794918287 | 222 Count | 741 Count | 205 Count | 4.07 VDC | 0 VDC |
| 1794916486 | 193 Count | 677 Count | 177 Count | 4.1 VDC | 0 VDC |
| 1794914685 | 182 Count | 635 Count | 167 Count | 4.05 VDC | 0 VDC |
| 1794912884 | 171 Count | 589 Count | 157 Count | 4.08 VDC | 0 VDC |
| 1794911092 | 154 Count | 540 Count | 145 Count | 4.05 VDC | 0 VDC |
| 1794909291 | 143 Count | 499 Count | 135 Count | 4.09 VDC | 0 VDC |
| 1794907490 | 103 Count | 429 Count | 96 Count | 4.04 VDC | 0 VDC |
| 1794905690 | 89 Count | 381 Count | 83 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)