This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793318054 | 319 Count | 1013 Count | 294 Count | 4.07 VDC | 0 VDC |
| 1793316253 | 304 Count | 963 Count | 280 Count | 4.08 VDC | 0 VDC |
| 1793314452 | 288 Count | 907 Count | 265 Count | 4.07 VDC | 0 VDC |
| 1793312660 | 269 Count | 858 Count | 251 Count | 4.11 VDC | 0 VDC |
| 1793310859 | 253 Count | 808 Count | 236 Count | 4.06 VDC | 0 VDC |
| 1793309058 | 236 Count | 755 Count | 220 Count | 4.1 VDC | 0 VDC |
| 1793307258 | 221 Count | 709 Count | 206 Count | 4.06 VDC | 0 VDC |
| 1793305457 | 205 Count | 659 Count | 191 Count | 4.11 VDC | 0 VDC |
| 1793303656 | 187 Count | 600 Count | 174 Count | 4.05 VDC | 0 VDC |
| 1793301856 | 161 Count | 514 Count | 149 Count | 4.08 VDC | 0 VDC |
| 1793300055 | 145 Count | 465 Count | 134 Count | 4.09 VDC | 0 VDC |
| 1793298254 | 130 Count | 414 Count | 120 Count | 4.07 VDC | 0 VDC |
| 1793296453 | 102 Count | 321 Count | 93 Count | 4.11 VDC | 0 VDC |
| 1793294653 | 87 Count | 271 Count | 79 Count | 4.06 VDC | 0 VDC |
| 1793292852 | 70 Count | 211 Count | 63 Count | 4.09 VDC | 0 VDC |
| 1793291059 | 49 Count | 155 Count | 47 Count | 4.11 VDC | 0 VDC |
| 1793289259 | 33 Count | 107 Count | 32 Count | 4.06 VDC | 0 VDC |
| 1793287458 | 18 Count | 58 Count | 18 Count | 4.08 VDC | 0 VDC |
| 1793285657 | 361 Count | 1001 Count | 341 Count | 4.09 VDC | 0 VDC |
| 1793283857 | 343 Count | 945 Count | 324 Count | 4.09 VDC | 0 VDC |
| 1793282056 | 324 Count | 891 Count | 306 Count | 4.11 VDC | 0 VDC |
| 1793280255 | 305 Count | 827 Count | 288 Count | 4.06 VDC | 0 VDC |
| 1793278454 | 290 Count | 781 Count | 274 Count | 4.08 VDC | 0 VDC |
| 1793276654 | 272 Count | 724 Count | 257 Count | 4.11 VDC | 0 VDC |
| 1793274853 | 256 Count | 678 Count | 242 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)