This is the latest recevied telemetry packets stored in our database for station/object SZ1SV-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779661266 | 238 Count | 493 Count | 207 Count | 0 VDC | 0 VDC |
| 1779660364 | 231 Count | 479 Count | 201 Count | 0 VDC | 0 VDC |
| 1779659460 | 223 Count | 464 Count | 194 Count | 0 VDC | 0 VDC |
| 1779659041 | 222 Count | 464 Count | 194 Count | 0 VDC | 0 VDC |
| 1779658138 | 217 Count | 450 Count | 190 Count | 0 VDC | 0 VDC |
| 1779657235 | 209 Count | 434 Count | 183 Count | 0 VDC | 0 VDC |
| 1779656332 | 200 Count | 414 Count | 175 Count | 0 VDC | 0 VDC |
| 1779655429 | 187 Count | 389 Count | 163 Count | 0 VDC | 0 VDC |
| 1779654526 | 178 Count | 376 Count | 155 Count | 0 VDC | 0 VDC |
| 1779653619 | 172 Count | 364 Count | 150 Count | 0 VDC | 0 VDC |
| 1779652715 | 164 Count | 349 Count | 143 Count | 0 VDC | 0 VDC |
| 1779651812 | 158 Count | 334 Count | 138 Count | 0 VDC | 0 VDC |
| 1779650909 | 149 Count | 322 Count | 130 Count | 0 VDC | 0 VDC |
| 1779650006 | 145 Count | 309 Count | 127 Count | 0 VDC | 0 VDC |
| 1779649103 | 138 Count | 293 Count | 121 Count | 0 VDC | 0 VDC |
| 1779648200 | 131 Count | 278 Count | 115 Count | 0 VDC | 0 VDC |
| 1779647297 | 123 Count | 263 Count | 108 Count | 0 VDC | 0 VDC |
| 1779646394 | 117 Count | 245 Count | 103 Count | 0 VDC | 0 VDC |
| 1779645491 | 105 Count | 224 Count | 92 Count | 0 VDC | 0 VDC |
| 1779644588 | 99 Count | 204 Count | 87 Count | 0 VDC | 0 VDC |
| 1779643687 | 92 Count | 187 Count | 81 Count | 0 VDC | 0 VDC |
| 1779642785 | 86 Count | 171 Count | 76 Count | 0 VDC | 0 VDC |
| 1779642468 | 90 Count | 184 Count | 80 Count | 0 VDC | 0 VDC |
| 1779641565 | 85 Count | 171 Count | 76 Count | 0 VDC | 0 VDC |
| 1779640662 | 79 Count | 159 Count | 71 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)