This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792547614 | 52 Count | 174 Count | 49 Count | 0 VDC | 0 VDC |
| 1792545811 | 40 Count | 138 Count | 38 Count | 0 VDC | 0 VDC |
| 1792544008 | 28 Count | 94 Count | 27 Count | 0 VDC | 0 VDC |
| 1792542205 | 14 Count | 50 Count | 14 Count | 0 VDC | 0 VDC |
| 1792540402 | 280 Count | 1025 Count | 253 Count | 0 VDC | 0 VDC |
| 1792538600 | 265 Count | 973 Count | 239 Count | 0 VDC | 0 VDC |
| 1792536830 | 247 Count | 921 Count | 226 Count | 0 VDC | 0 VDC |
| 1792535027 | 233 Count | 872 Count | 213 Count | 0 VDC | 0 VDC |
| 1792533224 | 219 Count | 829 Count | 200 Count | 0 VDC | 0 VDC |
| 1792531421 | 204 Count | 789 Count | 186 Count | 0 VDC | 0 VDC |
| 1792529618 | 192 Count | 753 Count | 175 Count | 0 VDC | 0 VDC |
| 1792527815 | 178 Count | 713 Count | 162 Count | 0 VDC | 0 VDC |
| 1792526012 | 167 Count | 670 Count | 152 Count | 0 VDC | 0 VDC |
| 1792524209 | 152 Count | 626 Count | 138 Count | 0 VDC | 0 VDC |
| 1792522406 | 138 Count | 573 Count | 125 Count | 0 VDC | 0 VDC |
| 1792520603 | 124 Count | 514 Count | 112 Count | 0 VDC | 0 VDC |
| 1792518800 | 108 Count | 445 Count | 97 Count | 0 VDC | 0 VDC |
| 1792516997 | 93 Count | 388 Count | 83 Count | 0 VDC | 0 VDC |
| 1792515227 | 75 Count | 337 Count | 70 Count | 0 VDC | 0 VDC |
| 1792513424 | 61 Count | 289 Count | 57 Count | 0 VDC | 0 VDC |
| 1792511621 | 48 Count | 234 Count | 45 Count | 0 VDC | 0 VDC |
| 1792509818 | 35 Count | 181 Count | 33 Count | 0 VDC | 0 VDC |
| 1792508015 | 25 Count | 125 Count | 24 Count | 0 VDC | 0 VDC |
| 1792506212 | 13 Count | 61 Count | 13 Count | 0 VDC | 0 VDC |
| 1792504409 | 303 Count | 1014 Count | 277 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)