This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793332525 | 32 Count | 93 Count | 31 Count | 0 VDC | 0 VDC |
| 1793330722 | 14 Count | 42 Count | 14 Count | 0 VDC | 0 VDC |
| 1793328919 | 418 Count | 1008 Count | 389 Count | 0 VDC | 0 VDC |
| 1793327116 | 398 Count | 960 Count | 370 Count | 0 VDC | 0 VDC |
| 1793325313 | 383 Count | 921 Count | 356 Count | 0 VDC | 0 VDC |
| 1793323510 | 364 Count | 879 Count | 338 Count | 0 VDC | 0 VDC |
| 1793321707 | 349 Count | 831 Count | 324 Count | 0 VDC | 0 VDC |
| 1793319904 | 330 Count | 784 Count | 306 Count | 0 VDC | 0 VDC |
| 1793318101 | 309 Count | 742 Count | 286 Count | 0 VDC | 0 VDC |
| 1793316298 | 295 Count | 705 Count | 273 Count | 0 VDC | 0 VDC |
| 1793314528 | 274 Count | 666 Count | 257 Count | 0 VDC | 0 VDC |
| 1793312725 | 256 Count | 625 Count | 240 Count | 0 VDC | 0 VDC |
| 1793310922 | 237 Count | 587 Count | 222 Count | 0 VDC | 0 VDC |
| 1793309119 | 200 Count | 525 Count | 186 Count | 0 VDC | 0 VDC |
| 1793307316 | 183 Count | 487 Count | 170 Count | 0 VDC | 0 VDC |
| 1793305513 | 164 Count | 450 Count | 152 Count | 0 VDC | 0 VDC |
| 1793303710 | 149 Count | 396 Count | 138 Count | 0 VDC | 0 VDC |
| 1793301907 | 132 Count | 349 Count | 122 Count | 0 VDC | 0 VDC |
| 1793300104 | 117 Count | 318 Count | 108 Count | 0 VDC | 0 VDC |
| 1793298301 | 101 Count | 264 Count | 93 Count | 0 VDC | 0 VDC |
| 1793296498 | 84 Count | 220 Count | 77 Count | 0 VDC | 0 VDC |
| 1793294695 | 59 Count | 167 Count | 53 Count | 0 VDC | 0 VDC |
| 1793292926 | 34 Count | 112 Count | 33 Count | 0 VDC | 0 VDC |
| 1793291123 | 17 Count | 60 Count | 17 Count | 0 VDC | 0 VDC |
| 1793289319 | 320 Count | 1064 Count | 299 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)