This is the latest recevied telemetry packets stored in our database for station/object SP8RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775058777 | 297 Count | 746 Count | 280 Count | 0 VDC | 0 VDC |
| 1775051727 | 197 Count | 454 Count | 186 Count | 0 VDC | 0 VDC |
| 1775037176 | 397 Count | 767 Count | 378 Count | 0 VDC | 0 VDC |
| 1775025167 | 206 Count | 395 Count | 198 Count | 0 VDC | 0 VDC |
| 1775022780 | 158 Count | 311 Count | 155 Count | 0 VDC | 0 VDC |
| 1775020379 | 108 Count | 214 Count | 107 Count | 0 VDC | 0 VDC |
| 1775017977 | 503 Count | 1149 Count | 477 Count | 0 VDC | 0 VDC |
| 1775015585 | 393 Count | 943 Count | 369 Count | 0 VDC | 0 VDC |
| 1775013173 | 357 Count | 850 Count | 335 Count | 0 VDC | 0 VDC |
| 1775010772 | 318 Count | 749 Count | 298 Count | 0 VDC | 0 VDC |
| 1775008370 | 279 Count | 652 Count | 261 Count | 0 VDC | 0 VDC |
| 1775005968 | 244 Count | 563 Count | 228 Count | 0 VDC | 0 VDC |
| 1775001180 | 167 Count | 382 Count | 159 Count | 0 VDC | 0 VDC |
| 1774998778 | 126 Count | 292 Count | 120 Count | 0 VDC | 0 VDC |
| 1774996376 | 91 Count | 205 Count | 87 Count | 0 VDC | 0 VDC |
| 1774993974 | 52 Count | 113 Count | 50 Count | 0 VDC | 0 VDC |
| 1774986769 | 458 Count | 909 Count | 441 Count | 0 VDC | 0 VDC |
| 1774984370 | 425 Count | 819 Count | 410 Count | 0 VDC | 0 VDC |
| 1774979579 | 211 Count | 457 Count | 204 Count | 0 VDC | 0 VDC |
| 1774977177 | 143 Count | 308 Count | 138 Count | 0 VDC | 0 VDC |
| 1774974775 | 88 Count | 191 Count | 85 Count | 0 VDC | 0 VDC |
| 1774972373 | 38 Count | 84 Count | 37 Count | 0 VDC | 0 VDC |
| 1774969972 | 468 Count | 1030 Count | 444 Count | 0 VDC | 0 VDC |
| 1774967570 | 429 Count | 950 Count | 407 Count | 0 VDC | 0 VDC |
| 1774965205 | 385 Count | 861 Count | 365 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)