This is the latest recevied telemetry packets stored in our database for station/object SQ2SIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792578205 | 42 Count | 686 Count | 15 Count | 0 VDC | 0 VDC |
| 1792577604 | 41 Count | 668 Count | 15 Count | 0 VDC | 0 VDC |
| 1792577004 | 40 Count | 646 Count | 15 Count | 0 VDC | 0 VDC |
| 1792576403 | 39 Count | 620 Count | 15 Count | 0 VDC | 0 VDC |
| 1792575802 | 38 Count | 597 Count | 15 Count | 0 VDC | 0 VDC |
| 1792575201 | 37 Count | 577 Count | 15 Count | 0 VDC | 0 VDC |
| 1792574601 | 36 Count | 558 Count | 15 Count | 0 VDC | 0 VDC |
| 1792566809 | 23 Count | 245 Count | 15 Count | 0 VDC | 0 VDC |
| 1792566208 | 22 Count | 219 Count | 15 Count | 0 VDC | 0 VDC |
| 1792565607 | 21 Count | 196 Count | 15 Count | 0 VDC | 0 VDC |
| 1792565006 | 20 Count | 170 Count | 15 Count | 0 VDC | 0 VDC |
| 1792564406 | 19 Count | 142 Count | 15 Count | 0 VDC | 0 VDC |
| 1792563805 | 18 Count | 119 Count | 15 Count | 0 VDC | 0 VDC |
| 1792563204 | 16 Count | 91 Count | 14 Count | 0 VDC | 0 VDC |
| 1792562603 | 1 Count | 49 Count | 0 Count | 0 VDC | 0 VDC |
| 1792562003 | 0 Count | 27 Count | 0 Count | 0 VDC | 0 VDC |
| 1792561402 | 146 Count | 1007 Count | 19 Count | 0 VDC | 0 VDC |
| 1792560801 | 145 Count | 980 Count | 19 Count | 0 VDC | 0 VDC |
| 1792560200 | 144 Count | 957 Count | 19 Count | 0 VDC | 0 VDC |
| 1792559606 | 143 Count | 933 Count | 19 Count | 0 VDC | 0 VDC |
| 1792559005 | 142 Count | 910 Count | 19 Count | 0 VDC | 0 VDC |
| 1792558404 | 141 Count | 895 Count | 19 Count | 0 VDC | 0 VDC |
| 1792557804 | 140 Count | 889 Count | 19 Count | 0 VDC | 0 VDC |
| 1792557203 | 139 Count | 884 Count | 19 Count | 0 VDC | 0 VDC |
| 1792556602 | 138 Count | 879 Count | 19 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)